GB/T 14173-1993
Replaced
T/CHES 66-2022
Active
Group standards
T/CHES 66-2022 Ecological slope protection and guidelines for the application of honeycomb lattice
T/CHES 66-2022 Ecological slope protection and guidelines for the application of honeycomb lattice
Price:
$ 37.00
Basic Information
Standard Code:
T/CHES 66-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Irrigation and drainage, as well as water and soil conservation projects
ICS Name:
Hydraulic structures
Publish Date:
2022-02-22
Implement Date:
2022-05-05
Pages:
52 pages
Scope
1.0.1 This standard specifies the design standards for the specifications and performance of honeycomb nets and auxiliary components, and clarifies the relevant requirements for the application of honeycomb nets in slope protection in various engineering projects, including design, construction, quality control, and maintenance.
1.0.2 This standard applies to various slope protection projects with a slope no greater than 1:0.75 and a flow velocity of less than 5 m/s, including slope protection, slope-type revetments, dams, artificial channels, mountain slopes, roads, and other slope protection projects. Other projects can refer to and use this standard as a guide.
1.0.3 When designing and constructing honeycomb net slope protection, in addition to complying with this standard, it shall also comply with the provisions of the current relevant national standards.
Development Information
Referenced Standards
GB/T 1499.2-2007 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1499.2-2018 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB 1499.2-2024 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST)
GB/T 1842-1999 Test method for environmental stress-cracking of polyethylene plastics
GB/T 1842-2008 Plastics—Test method for environmental stress-cracking of polyethylene
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 5470-2008 Plastics—Determination of the brittleness temperature by impact
GB/T 11546.1-2008 Plastic—Determination of creep behaviour—Part 1:Tensile creep
GB/T 16422.2-1999 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon—arc sources
GB/T 16422.2-2014 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon-arc sources
GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon-arc lamps
GB/T 16453.2-1996 Regulation of techniques for comprehensive control of soil erosion—Technique for erosion control of waste land
GB/T 16453.2-2008 Comprehensive control of soil and water conservation—Technical specification—Technique for erosion control of waste land
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings
GB/T 19274-2003 Geosynthetics plastic geocell
GB/T 19274-2024 Geosynthetics—Plastic geocell
GB/T 36800.2-2018 Plastics—Thermomechanical analysis(TMA)—Part 2:Determination of coefficient of linear thermal expansion and glass transition temperature
GB 50288-2018 Design standard for irrigation and drainage engineering
SL/T 225
SL 386-2007 SL 386-2007 Specification for slope design of water conservancy and hydropower projects
SL 634-2012 Water Resources and Hydropower Unit Construction Quality Acceptance and Evaluation Standard - Embankment Engineering
SL/T 654-2014 Design specifications for reasonable service life and durability of water resources and hydropower engineering
JG/T 193-2006 Sodium bentonite geosynthetic clay liner
TD/T 1048-2016 TD/T 1048-2016 Soil Excavation and Utilization of the Working Layer Techniques Specification
YB/T 5295-2010 Sealed steel wire rope
GB/T 50290-2014 Technical Specifications for the Application of Geosynthetic Materials (with Explanatory Notes on the Provisions)
GB 51018-2014 Design Code for Water and Soil Conservation Projects
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 1633-2025 Plastics—Thermoplastic materials—Determination of Vicat softerning temperature(VST)
SL/T 386-2025 Design specifications for slopes and retaining walls in water resources and hydropower engineering
Related Standards
GB/T 20203-2006
Replaced
GB/T 20203-2006 Technical specification for irrigation projects with low pressure pipe conveyance
GB/T 21303-2007
Replaced
GB/T 21303-2007 Specification for water measuring of irrigation canal system
GB/T 30949-2014
Replaced
GB/T 30949-2014 Post evaluation standard for water saving irrigation project
GB/T 32748-2016
Active
GB/T 32748-2016 Canal lining and seepage prevention materials
GB/T 20203-2017
Active