CJ/T 225-2006
Replaced
T/CECS 10011-2022
Active
Group standards
T/CECS 10011-2022 Polyethylene blended with high-performance double-walled corrugated pipe material of polyvinyl chloride
T/CECS 10011-2022 Polyethylene blended with high-performance double-walled corrugated pipe material of polyvinyl chloride
Price:
$ 36.00
Basic Information
Standard Code:
T/CECS 10011-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Outdoor water supply and drainage projects
ICS Name:
Drainage system
Publish Date:
2022-12-29
Implement Date:
2023-05-01
Pages:
24 pages
Scope
This document specifies the symbols and abbreviations, classification and marking, materials, structure and connection methods, requirements, test methods, inspection rules, as well as marking, transportation and storage for high-performance double-wall corrugated PVC pipes made of polyethylene blends.
This document is applicable to the manufacture and inspection of high-performance double-wall corrugated PVC pipes (hereinafter referred to as "pipes").
This document is applicable to long-term conveying media with a temperature not exceeding 45 °C, including municipal and residential district underground drainage pipes, industrial drainage pipes, integrated pipe galleries, and agricultural irrigation pipes.
Development Information
Replace the following standards
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1033.2-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 2:Density gradient column method
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST)
GB/T 2406.2-2009 Plastics—Determination of burning behaviour by oxygen index—Part 2:Ambient-temperature test
GB/T 2408-1996 Plastics—Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3401-1999 Determination of viscosity number of PVC resins in dilute solution
GB/T 3401-2007 Determination of the viscosity of Poly(vinyl chloride) resins in dilute solution using capillary viscometers
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 6031-1998 Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6031-2017 Rubber,vulcanized or thermoplastic—Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method
GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure
GB/T 7139-2002 Plastics-Vinyl chloride homopolymers and copolymers—Determination of chlorine content
GB/T 7139-2023 Plastics—Vinyl chloride homopolymers and copolymers—Determination of chlorine content
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 8804.2-2003 Thermoplastic pipes—Determination of tensile properties—Part 2:Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 8806-1988 Method for dimension measuring of plastic pipes
GB/T 9341-2000 Plastics—Determination of flexural properties
GB/T 9341-2008 Plastics—Determination of flexural properties
GB/T 9647-2003 Thermoplastics pipes—Determination of ring stiffness
GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness
GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method
GB/T 18042-2000 Thermoplastics pipes—Determination of creep ratio
GB/T 20022-2005 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of apparent density
GB/T 39383-2020 Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
Related Standards
CJ/T 231-2006
Active
CJ/T 231-2006 Unplasticized polyvinyl chloride(PVC-U)and glass microsphere composite pipes for drainage
CJ/T 233-2006
Replaced
CJ/T 233-2006 Plastics inspection chambers for sewerage in building area
CJ/T 250-2007
Replaced
CJ/T 250-2007 High density polyethylene pipes and fittings for drainage inside buildings
CJ/T 270-2007
Replaced
CJ/T 270-2007 Steel reinforced spirally wound Polyethylene(PE) drainage pipe
CJ/T 273-2008
Replaced