GB/T 40006.9-2021 Active National standards

GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly (ethylene terephthalate) (PET) materials

GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly (ethylene terephthalate) (PET) materials

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 75

Basic Information

Standard Code: GB/T 40006.9-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synthetic resins and plastics

ICS Name: Thermoplastic plastics

Publish Date: 2021-10-11

Implement Date: 2022-05-01

Pages: 20 pages

Scope

This document specifies the classification and naming, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of recycled polyethylene terephthalate (PET) plastics.
This document applies to flake-shaped recycled PET plastic materials (referred to as bottle flakes) obtained from crushed, screened, classified, and cleaned PET plastic bottles, or granular PET recycled plastic materials (referred to as granules or flakes) made by melting and extruding PET plastic bottles and/or other PET products into pellets.
This document does not apply to recycled plastics from hazardous waste such as medical waste and pesticide packaging, or radioactive pollutants.
This document does not apply to mixed plastics obtained from the reprocessing of polyethylene terephthalate (PET) and other plastic materials.

Development Information

Word Count: 40 Thousand words Pages: 20 pages

Same series standard

GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules GB/T 40006.2-2021 Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials GB/T 40006.3-2021 Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials GB/T 40006.5-2021 Plastics—Recycled plastics—Part 5:Acrylonitrile-butadiene-styrene (ABS) materials GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6:Polystyrene(PS)and impact-resistant polystyrene(PS-I) materials GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7:Polycarbonate(PC) materials GB/T 40006.8-2021 Plastics—Recycled plastics—Part 8:Polyamide (PA) materials

Referenced Standards

GB/T 1632.5-2008 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 5:Thermoplastic polyester(TP) homopolymers and copolymers GB/T 14189-2015 Fiber grade polyester chipPET） GB/T 14190-2017 Testing methods of fiber grade polyester (PET) chip GB/T 30102-2013 Plastics—Guidelines for the recovery and recycling of plastics waste GB/T 39827.1-2021 Plastics—Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates—Part 1:Designation system and basis for specifications GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules GB/T 2035-1996 Terms and definitions for plastics GB/T 2035-2008 Terms and definitions for plastics GB/T 2035-2024 Plastics—Vocabulary GB/T 2547-1981 Plastic resins—Sampling GB/T 2547-2008 Plastic resins—Sampling GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods GB/T 8170-1987 Rules for rounding off of numberical values GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 9345.2-2008 Plastics—Determination of ash—Part 2:Poly(alkylene terephthalate)materials GB/T 19466.3-2004 Plastics—Differential scanning calorimetry(DSC)—Part 3:Determination of temperature and enthalpy of melting and crystallization SH/T 1817-2017 Determination of residual acetaldehyde content in plastic bottles using polyethylene terephthalate (PET) resin by headspace gas chromatography SH/T 1824-2019 The Determination of Antimony Content in Thermoplastics Polyesters SH/T 1824-2019 GB/T 19466.3-2025 Plastics—Differential scanning calorimetry(DSC) method—Part 3:Determination of temperature and enthalpy of melting and crystallization

Related Standards

GB/T 6595-1986 Replaced

GB/T 6595-1986 Test method for fish eye count of polypropylene resin

Publish Date: 1986-07-24

GB/T 6598-1986 Active

GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method

Publish Date: 1986-07-24

GB/T 6599-1986 abolished_transferred

GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Publish Date: 1986-07-24

GB/T 8330-1987 Replaced

GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state

Publish Date: 1987-11-15

GB/T 8331-1987 Replaced

GB/T 8331-1987 Method for the determination of bulk density of ion exchange resins in wet state

Publish Date: 1987-11-15

GB/T 8324-1987 Replaced

GB/T 8324-1987 Test method for bulk factor of moulding materials

Publish Date: 1987-12-01