GB/T 40006.7-2021 Active National standards

GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7:Polycarbonate(PC) materials

GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7:Polycarbonate(PC) materials

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 40006.7-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Synthetic resins and plastics
ICS Name: Thermoplastic plastics
Publish Date: 2021-10-11
Implement Date: 2022-05-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国塑料标准化技术委员会(SAC/TC 15)
Pages: 14 pages

Scope

本文件规定了聚碳酸酯再生塑料的分类与命名、要求、试验方法、检验规则、标志、包装、运输和贮存等。
本文件适用于以废弃的聚碳酸酯塑料为原料,经筛选、分类、清洗、熔融挤出造粒等工艺制成的聚碳酸酯再生塑料颗粒,该聚碳酸酯再生塑料的基体为GB/T 35513.1规定的含碳酸和芳香族二酚化合物的热塑性聚酯,聚酯可以是均聚物、共聚物或二者的混合物。
本文件不适用于来自医疗废物、农药包装等危险废物和放射性废物的聚碳酸酯再生塑料。
本文件不适用于聚碳酸酯和其他树脂材料的混合再生塑料。

Development Information

Drafting Units:

上海奥塞尔材料科技有限公司、成都产品质量检验研究院有限责任公司、浙江普利特新材料有限公司、科思创(上海)投资有限公司、万华化学集团股份有限公司、中蓝晨光成都检测技术有限公司、中国石油和化学工业联合会、中国环境科学研究院、沙特基础工业(中国)投资有限公司、盛禧奥聚合物(张家港)有限公司上海分公司、厦门灵杰科技有限公司、宁波旭日鸿宇科技有限公司、山东万达化工有限公司、山东道恩高分子材料股份有限公司、中华人民共和国青岛大港海关、广州海关技术中心、北京燕山石化高科技术有限责任公司、鲁西化工集团股份有限公司、青岛中新华美塑料有限公司

Drafting Persons:

夏文君、杜赏、张晓飞、纪效均、薛茂刚、张雷、陈敏剑、谢鹏、杨建海、周炳炎、卞华松、余毅强、黄瑞宇、葛赢、谢丰鸣、赵磊、高建国、李丹、郑慧琴、张超、王东、石琳、蒋美琴、张彦君、于泓锦、郭凌霄

Word Count: 29 Thousand words Pages: 14 pages

Same series standard

Referenced Standards

GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles GB/T 1843-2008 Plastics—Determination of izod impact strength GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method GB/T 9345.1-2008 Plastics—Determination of ash—Part 1:General methods GB/T 14190-2017 Testing methods of fiber grade polyester (PET) chip GB/T 35513.2-2017 Plastics—Polycarbonate(PC) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics GB/T 2035-1996 Terms and definitions for plastics GB/T 2035-2008 Terms and definitions for plastics GB/T 2035-2024 Plastics—Vocabulary GB/T 2547-1981 Plastic resins—Sampling GB/T 2547-2008 Plastic resins—Sampling GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing GB/T 8170-1987 Rules for rounding off of numberical values GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 9341-2000 Plastics—Determination of flexural properties GB/T 9341-2008 Plastics—Determination of flexural properties GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials—Part 1:General principles and moulding of multipurpose and bar test specimens GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles,and moulding of multipurpose and bar test specimens GB/T 19466.2-2004 Plastics—Differential scanning calorimetry(DSC)—Part 2:Determination of glass transition temperature GB/T 30102-2013 Plastics—Guidelines for the recovery and recycling of plastics waste GB/T 30102-2024 Guidelines for the recovery and recycling of plastics waste GB/T 33352-2016 General rules of screening application of restricted substances in electrical and electronic products—X-Ray fluorescence spectrometry GB/T 33352-2024 General rules of screening application of restricted substances in electrical and electronic products—X-Ray fluorescence spectrometry SH/T 1541.1-2019 Plastic particle appearance test method - Part 1: Visual method GB/T 19466.2-2025 Plastics—Differential scanning calorimetry(DSC) method—Part 2:Determination of glass transition temperature and step height

Related Standards

Contact Us