Standards

FZ/T 12009-2011 Replaced

FZ/T 12009-2011 Acrylic grey yarns

This standard specifies the classification, labeling, requirements, test methods, inspection rules, marking, and packaging of acrylic (cotton-type short fiber) yarn products in their natural colors.
This standard is applicable to assessing the quality of acrylic yarns in their natural colors for ring spinning (including yarns for weaving and knitting).
This standard is not applicable to assessing the quality of acrylic yarns in their natural colors for special purposes.

Publish Date: 2011-05-18

FZ/T 15002-2011 Replaced

FZ/T 15002-2011 Polyacrylic sizes used in textile warp sizing

This standard specifies the classification and marking, technical requirements, test methods, inspection rules, marking, packaging, storage, and transportation of polyacrylic acid-based sizing agents for textiles.
This standard is applicable to the quality assessment of polyacrylic acid-based sizing agents for textiles.

Publish Date: 2011-05-18

FZ/T 43013-2011 Replaced

FZ/T 43013-2011 Silk velvet fabrics

This standard specifies the terms and definitions, requirements, test methods, inspection rules, packaging, and marking for velvet fabrics.
This standard is applicable to the evaluation of the quality of white, dyed, printed, jacquard, and yarn-dyed velvet fabrics, which are divided into two layers by weaving.

Publish Date: 2011-05-18

FZ/T 50010.3-2011 Replaced

FZ/T 50010.3-2011 Pulp board for viscose fiber—Determination of viscosity

This standard specifies the methods for determining the viscosity of pulp used for viscose fibers—the copper ethylene diamine (CED) solution method, the copper amine solution capillary viscometer method, the copper amine solution falling ball method, and the method for determining the degree of polymerization.
This standard is applicable to various pulps used for viscose fibers, including cotton pulp, wood pulp, bamboo pulp, and hemp pulp, etc.

Publish Date: 2011-05-18

FZ/T 50016-2011 Replaced

FZ/T 50016-2011 Testing method for flame retardant property of viscose staple fibers—Oxygen index

This standard specifies the test method for the flame retardant performance of viscose staple fibers — the oxygen index method.
This method is suitable for determining the oxygen index of flame-retardant viscose staple fibers, and the fiber length should meet the requirements for spinning. Other types of staple fibers can be used as a reference.
This standard is only used to determine the combustion performance of materials under laboratory conditions and to control product quality, but it cannot be used as a basis for assessing the fire hazard under actual use conditions, or it can only be used to analyze all factors of a material used for a particular purpose in the event of a fire. This standard is not suitable for evaluating materials with high shrinkage rates after heating.

Publish Date: 2011-05-18

FZ/T 50017-2011 Replaced

FZ/T 50017-2011 Testing method for flame retardant property of polyester fibers—Oxygen index

This standard specifies the test method for the flame retardancy of polyester staple fibers (including hollow fibers) and polyester filament yarns - the oxygen index method.
This standard is applicable to the determination of the oxygen index of polyester staple fibers (including hollow fibers) and polyester filament yarns.
This standard is only used to determine the combustion performance of materials under laboratory conditions and to control product quality, but it cannot be used as a basis for assessing the fire hazard under actual use conditions, or it can only be used to analyze all factors when a material for a particular use catches fire. This standard is not applicable to the evaluation of materials with high shrinkage rates after heating.

Publish Date: 2011-05-18

FZ/T 54038-2011 Replaced

FZ/T 54038-2011 Bright profiled polyester drawn textured yarns

This standard specifies the terms and definitions, product identification, technical requirements, test methods, inspection rules and markings, packaging, transportation, and storage requirements for glossy polyester low-elasticity filament yarn with special cross-sections.
This standard applies to glossy polyester low-elasticity filament yarn with triangular and three-leaf special cross-sections, with a total linear density of 55 dtex to 888 dtex and a single filament linear density of 0.5 dtex to 5.6 dtex. Other types of glossy polyester low-elasticity filament yarn can be implemented as a reference.

Publish Date: 2011-05-18

FZ/T 54039-2011 Replaced

FZ/T 54039-2011 Bright profiled polyester drawn yarns

This standard specifies the terms and definitions, product identification, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage requirements for bright-colored shaped polyester drawn filament yarns.
This standard applies to bright-colored shaped polyester drawn filament yarns with a linear density of 15 dtex to 340 dtex and a single filament linear density of 0.6 dtex to 8.0 dtex, with triangular, three-leaf, and flat shaped cross-sections. Other types of bright-colored shaped polyester drawn filament yarns can be used as reference for application.

Publish Date: 2011-05-18

FZ/T 64002-2011 Replaced

FZ/T 64002-2011 Composed thermal insulation material—Wadding composed of coated metal film

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation, and storage of metal-coated composite flakes made from composite insulation materials.
This standard is applicable to the quality assessment of metal-coated composite flakes made from composite insulation materials, which are mainly composed of fiber flakes, aluminum-coated films, and aluminum alloy films (including carriers) and are processed by composite methods, and are used in clothing, bedding, automotive interior parts, and other filling and insulation applications.
Other similar products can be used as reference.

Publish Date: 2011-05-18

FZ/T 64003-2011 Replaced

FZ/T 64003-2011 Wadding of spray-bounded nonwovens

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation, and storage of spray-bonded cotton wadding.
This standard is applicable to the quality assessment of spray-bonded cotton wadding, which is mainly made from polyester staple fibers. The fibers are first combed into a web, then sprayed with a liquid adhesive on the web, and finally processed by heat treatment.

Publish Date: 2011-05-18

FZ/T 64005-2011 Replaced

FZ/T 64005-2011 Sanitary thin nonwoven

This standard specifies the product classification, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of thin nonwoven fabrics for hygiene purposes.
This standard is applicable to the quality assessment of thin nonwoven fabrics made from short fibers meeting hygiene requirements, with the nonwoven web reinforced by hot-melt bonding.
This standard is applicable to the fabrics and coating materials of disposable hygiene products with a weight of 18 g/m2 to 30 g/m2.

Publish Date: 2011-05-18

FZ/T 24014-2010 Replaced

FZ/T 24014-2010 Printing worsted fabrics

This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, and packaging and marking for printed fine-combed wool fabrics.
This standard is applicable to the quality appraisal of various woven garments made of fine-combed pure wool, wool blends (containing more than 30% wool and other animal fibers), and interwoven fabrics produced by direct printing methods.

Publish Date: 2010-12-29