GB 19510.4-2009 Active National standards force_standard

GB 19510.4-2009 Lamp controlgear—Part 4:Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

Publish Date: 2009-10-15 Implement Date: 2010-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 19510.4-2009

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Lighting fixtures and accessories

ICS Name: Other standards related to lighting

Publish Date: 2009-10-15

Implement Date: 2010-12-01

Pages: 26 pages

Scope

This section specifies the special requirements for electronic ballasts used with fluorescent lamps described in IEC 60081 and IEC 60901, as well as other high-frequency fluorescent lamps. These electronic ballasts operate on AC power with a frequency of 50 Hz or 60 Hz and a voltage below 1,000 V, but their operating frequency is different from that of the power supply.
The special requirements for electronic ballasts with overheat protectors are given in Appendix C.
The special requirements for AC/DC electronic ballasts used in emergency lighting are given in Appendix J.
The performance requirements are given in GB/T 15144.

Development Information

Word Count: 43 Thousand words Pages: 26 pages

Same series standard

GB 19510.1-2009 Lamp controlgear—Part 1:General and safety requirements GB 19510.2-2009 Lamp controlgear—Part 2:Particular requirements for starting devices (other than glow starters) GB 19510.3-2009 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c. supplied electronic step-down convertors for filament lamps GB 19510.8-2009 Lamp controlgear—Part 8:Particular requirements for d.c.supplied electronic ballasts for emergency lighting GB 19510.9-2009 Lamp controlgear—Part 9:Particular requirements for ballasts for fluorescent lamps GB 19510.10-2009 Lamp controlgear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps) GB 19510.14-2009 Lamp controlgear—Part 14:Particular requirements for d.c.or a.c.supplied electronic controlgear for LED modules

Replace the following standards

GB 19510.4-2005 Lamp controlgear—Part 4:Particular requirements for a.c.supplied electronic ballasts for fluorescent lamps

Superseded by the following standards

GB/T 19510.203-2023 Controlgear for electric light sources—Part 2-3:Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

Adopt standards

IEC 61347-2-3:2000

Related Standards

GB 19510.10-2004 Replaced

GB 19510.10-2004 Lamp control gear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Publish Date: 2004-05-10

GB 19510.11-2004 Replaced

GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)

Publish Date: 2004-05-10

GB 19510.1-2004 Replaced

GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements

Publish Date: 2004-05-10

GB 19510.3-2004 Replaced

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Publish Date: 2004-05-10

GB 19510.9-2004 Replaced

GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps

Publish Date: 2004-05-10

GB 19510.12-2005 Replaced

GB 19510.12-2005 Lamp controlgear—Part 12:Particular requirements for miscellaneous electronic circuits used with luminaries

Publish Date: 2005-01-18