GB 19510.14-2009 Active National standards force_standard

GB 19510.14-2009 Lamp controlgear—Part 14:Particular requirements for d.c.or a.c.supplied electronic controlgear for LED modules

Publish Date: 2009-10-15 Implement Date: 2010-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 19510.14-2009

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Lighting fixtures and accessories

ICS Name: Other standards related to lighting

Publish Date: 2009-10-15

Implement Date: 2010-12-01

Pages: 26 pages

Scope

This part of GB 19510 specifies the special safety requirements for electronic control devices used in LED modules powered by direct current below 250 V and alternating current below 1000 V at 50 Hz or 60 Hz, where the output frequency of the electronic control device is different from the power supply frequency. The LED module control devices specified in this part are designed to provide a constant voltage or current to the LED module under safe extra-low voltage or equivalent safe extra-low voltage or higher voltages. Control devices that are not pure voltage sources or current sources are also included in this part.

Development Information

Word Count: 46 Thousand words Pages: 26 pages

Same series standard

GB 19510.1-2009 Lamp controlgear—Part 1:General and safety requirements GB 19510.2-2009 Lamp controlgear—Part 2:Particular requirements for starting devices (other than glow starters) GB 19510.3-2009 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c. supplied electronic step-down convertors for filament lamps GB 19510.4-2009 Lamp controlgear—Part 4:Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps GB 19510.8-2009 Lamp controlgear—Part 8:Particular requirements for d.c.supplied electronic ballasts for emergency lighting GB 19510.9-2009 Lamp controlgear—Part 9:Particular requirements for ballasts for fluorescent lamps GB 19510.10-2009 Lamp controlgear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Superseded by the following standards

GB/T 19510.213-2023 Controlgear for electric light sources—Part 2-13:Particular requirements for d.c.or a.c. supplied electronic controlgear for LED modules

Adopt standards

IEC 61347-2-13:2006

Related Standards

GB 19510.10-2004 Replaced

GB 19510.10-2004 Lamp control gear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Publish Date: 2004-05-10

GB 19510.11-2004 Replaced

GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)

Publish Date: 2004-05-10

GB 19510.1-2004 Replaced

GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements

Publish Date: 2004-05-10

GB 19510.3-2004 Replaced

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Publish Date: 2004-05-10

GB 19510.9-2004 Replaced

GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps

Publish Date: 2004-05-10

GB 19510.12-2005 Replaced

GB 19510.12-2005 Lamp controlgear—Part 12:Particular requirements for miscellaneous electronic circuits used with luminaries

Publish Date: 2005-01-18