GB 19510.3-2009 Active National standards force_standard

GB 19510.3-2009 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c. supplied electronic step-down convertors for filament lamps

Publish Date: 2009-10-15 Implement Date: 2010-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 19510.3-2009

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Lighting fixtures and accessories

ICS Name: Other standards related to lighting

Publish Date: 2009-10-15

Implement Date: 2010-12-01

Pages: 24 pages

Scope

This part of GB 19510 specifies the special requirements for electronic step-down converters used with halogen tungsten lamps and other tungsten filament lamps as described in IEC 60357. Such electronic step-down converters use a DC power supply of less than 250 V or an AC power supply of less than 1,000 V at 50 Hz/60 Hz. The rated output voltage generated between the wires or between any wire and the ground wire is ≤50 V (rms, with a frequency different from the power supply frequency) or ≤502 V (pulsating DC power supply).

Development Information

Word Count: 42 Thousand words Pages: 24 pages

Same series standard

GB 19510.1-2009 Lamp controlgear—Part 1:General and safety requirements GB 19510.2-2009 Lamp controlgear—Part 2:Particular requirements for starting devices (other than glow starters) GB 19510.4-2009 Lamp controlgear—Part 4:Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps GB 19510.8-2009 Lamp controlgear—Part 8:Particular requirements for d.c.supplied electronic ballasts for emergency lighting GB 19510.9-2009 Lamp controlgear—Part 9:Particular requirements for ballasts for fluorescent lamps GB 19510.10-2009 Lamp controlgear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps) GB 19510.14-2009 Lamp controlgear—Part 14:Particular requirements for d.c.or a.c.supplied electronic controlgear for LED modules

Replace the following standards

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Superseded by the following standards

GB/T 19510.202-2023 Controlgear for electric light sources—Part 2-2:Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

Adopt standards

IEC 61347-2-2:2006

Related Standards

GB 19510.10-2004 Replaced

GB 19510.10-2004 Lamp control gear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Publish Date: 2004-05-10

GB 19510.11-2004 Replaced

GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)

Publish Date: 2004-05-10

GB 19510.1-2004 Replaced

GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements

Publish Date: 2004-05-10

GB 19510.3-2004 Replaced

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Publish Date: 2004-05-10

GB 19510.9-2004 Replaced

GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps

Publish Date: 2004-05-10

GB 19510.12-2005 Replaced

GB 19510.12-2005 Lamp controlgear—Part 12:Particular requirements for miscellaneous electronic circuits used with luminaries

Publish Date: 2005-01-18