GB/T 17459-1998
Abolished
JG/T 495-2016
Active
Industry standards-The construction industry
JG/T 495-2016 Specification of franklinism powder spraying coating for steel windows and doors
JG/T 495-2016 Specification of franklinism powder spraying coating for steel windows and doors
Basic Information
Standard Code:
JG/T 495-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Organic coating
Publish Date:
2016-06-01
Implement Date:
2016-12-01
Pages:
9 pages
Scope
This standard specifies the terms and definitions, requirements, test methods, and inspection rules for the powder electrostatic spray coating of steel doors and windows.
This standard applies to the coating of thermosetting powder coatings used for steel exterior doors and windows in buildings.
Development Information
Replace the following standards
Referenced Standards
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB 8076-2008 Concrete admixtures
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 1771-1991 Paints and varnishes—Determination of resistance to neutral salt spray
GB/T 1771-2007 Paints and varnishes—Determination of resistance to neutral salt spray(fog)
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 9271-1988 Paints and varnishes—Standard panels for testing
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9275-1988 Paints and varnishes—Buchholz indentation test
GB/T 9275-2008 Paint and varnishes—Buchholz indentation test
GB/T 9279-1988 Paints and varnishes—Scratch test
GB/T 9279-2007 Paints and varnishes—Scratch test
GB/T 9279.1-2015 Paints and varnishes—Determination of scratch resistance—Part 1:Constant-loading method
GB/T 9279.2-2015 Paints and varnishes—Determination of scratch resistance—Part 2:Variable-loading method
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 9761-2008 Paints and varnishes—Visual comparison of the colour of paints
GB/T 13452.2-1992 Paints and varnishes—Determination of film thickness
GB/T 13452.2-2008 Paints and varnishes—Determination of film thickness
GB/T 17671-1999 Method of testing cements—Determination of strength
GB/T 17671-2021 Test method of cement mortar strength(ISO method)
GB/T 23988-2009 Determination for abrasion resistance of coatings by falling abrasive
JC/T 481-2013
JC/T 481-1992 JC/T 481-1992 Building Dustless Slaked lime powder
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
JGJ 63-2006 Standard of water for concrete
Related Standards
GB/T 18593-2001
Replaced
GB/T 18593-2001 Anti-corrosive painting of fusion bonded epoxy coating powders
GB/T 24596-2009
Replaced
GB/T 24596-2009 Ductile iron pipes and fittings—Polyurethane coatings
GB/T 18593-2010
Active
GB/T 18593-2010 Anti-corrosive painting of fusion bonded epoxy coating powders
GB/T 28699-2012
Active
GB/T 28699-2012 Steel structure protection general requirements of coatings
GB/T 31361-2015
Active