GB 6738-1986
Abolished
GB/T 43191-2023
Active
National standards
GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles
GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles
Basic Information
Standard Code:
GB/T 43191-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrical parameter inspection and power supply devices
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2023-09-07
Implement Date:
2024-04-01
Pages:
33 pages
Scope
This document defines the terms and definitions of on-site testing instruments for electric vehicle AC charging piles, specifies technical requirements such as mechanical performance, electrical performance, electromagnetic compatibility, measurement performance, and interfaces, describes the corresponding test methods and inspection rules, and stipulates aspects such as marking, packaging, transportation, and storage. This document is applicable to the design, manufacture, procurement, and acceptance of on-site testing instruments for electric vehicle AC charging piles.
Development Information
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests
GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT)
GB/T 11918.1-2014 Plugs,socket-outlet and couplers for industrial purposes—Part 1:General requirements
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements,tests and test conditions—Part 11:Metering equipment
GB/T 17215.231-2021 Electricity metering equipment (AC)—General requirements,tests and test conditions—Part 31:Product safety requirements and tests
GB/T 18487.1-2015 Electric vehicle conductive charging system—Part 1:General requirements
GB/T 18487.2-2017 Electric vehicle conductive charging system—Part 2:EMC requirements for off-board electric vehicle supply equipment
GB/T 20234.2-2015 Connection set for conductive charging of electric vehicles—Part 2:AC charging coupler
GB/T 29317-2021 Terminology of electric vehicle charging/battery swap infrastructure
GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces
NB/T 33002-2018 Electric vehicle AC charging pile technical specifications
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced