GB/T 17215.211-2021 Active National standards

GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements,tests and test conditions—Part 11:Metering equipment

GB/T 17215.211-2021 Electricity metering equipment(AC)—General requirements,tests and test conditions—Part 11:Metering equipment

Publish Date: 2021-04-30 Implement Date: 2021-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 288

Basic Information

Standard Code: GB/T 17215.211-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: \nElectricity measurement and load control system

ICS Name: The measurement of electrical and magnetic quantities

Publish Date: 2021-04-30

Implement Date: 2021-11-01

Pages: 112 pages

Scope

This part of GB/T 17215.2 specifies the general mechanical and electrical requirements and test conditions applicable to AC energy meters (hereinafter referred to as "meters"), as well as requirements for their functions and markings, requirements for climatic and electromagnetic environments and test conditions, resistance to external influences tests and test conditions, and embedded software requirements.
Note 1: For other general requirements of meters (such as safety, reliability, etc.), please refer to the relevant sections of GB/T 17215.3 (all parts) and GB/T 17215.9 (all parts). Specific accuracy requirements and other special requirements for meters of different accuracy grades are specified in the relevant provisions of GB/T 17215.3 (all parts).
This part applies to new-manufactured electrical measuring equipment used for measuring and controlling electric energy in 50 Hz or 60 Hz power grids with a voltage not exceeding 600 V. All special functional units of the meter, except for its electric energy measurement function, can be integrated within the meter case or constitute a separate enclosure.
Note 2: The above-mentioned voltage is the line-to-line voltage derived from the nominal voltage, as specified in Table 7 of IEC 62052-31:2015.
If the meter has functions other than measuring active and reactive energy, such as:
——Measuring voltage amplitude, current amplitude, power, frequency, power factor (or sinφ), etc.;
——Measuring power quality parameters;
——Measuring other forms of energy such as water, gas, steam, heat, etc.;
——Load control function;
——Data communication interface.
If these functions are encapsulated within the meter case, the relevant standards may apply to these functional requirements, but these functions are not within the scope of this part.
Note 3: The requirements for power monitoring devices and measurement functions (such as voltage amplitude, current amplitude, pow

Development Information

Word Count: 211 Thousand words Pages: 112 pages

Same series standard

GB/T 17215.221-2021 Electricity metering equipment(a.c.)—General requirements, tests and test conditions—Part 21:Tariff and load control equipment GB/T 17215.231-2021 Electricity metering equipment (AC)—General requirements,tests and test conditions—Part 31:Product safety requirements and tests GB/T 17215.321-2021 Electricity metering equipment (AC)—Particular requirements—Part 21:Static meters for active energy(classes A,B,C,D and E) GB/Z 17215.611-2021 Electricity metering data exchange—The DLMS/COSEM suite—Part 11:Template for DLMS/COSEM communication profile standards GB/T 17215.647-2021 Electricity metering data exchange—The DLMS/COSEM suite—Part 47:DLMS/COSEM transport layer for IP networks GB/T 17215.673-2021 Electricity metering data exchange—The DLMS/COSEM suite—Part 73:Wired and wireless M-Bus communication profiles for local and neighbourhood networks GB/T 17215.691-2021 Electricity metering data exchange—The DLMS/COSEM suite—Part 91:Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS)

Replace the following standards

GB/T 17215.211-2006 Electricity metering equipment(a.c.)—General requirements,tests and test conditions—Part 11:Metering equipment

Referenced Standards

GB/T 17215.3(所有部分) IEC 61000-4-8:2009 IEC 61000-4-11 IEC 61000-4-19:2014 IEC 62052-31:2015 IEC CISPR 32 ISO 4892-3 GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.43-1995 Environmental testing for electric and electronic products Part 2:test methods—Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) and guidance GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests GB/T 2423.56-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fh:Vibration, broad-band random(digital control)and guidance GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration,broadband random and guidance GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 17215.9321-2016 Electricity metering equipment—Dependability—Part 321:Durability testing of the stability of metrological characteristics by applying elevated temperature GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.12-1998 Electromagnetic compatibility—Testing and measurement techniques—Oscillatory waves immunity test GB/T 17626.12-2013 Electromagnetic compatibility—Testing and measurement techniques—Ring wave immunity test GB/T 17626.12-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 12:Ring wave immunity test GB/T 17626.18-2016 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory wave immunity test GB/T 17626.20-2014 Electromagnetic compatibility—Testing and measurement techniques—Emission and immunity testing in transverse electromagnetic(TEM) waveguide GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests

Related Standards

GB 6738-1986 Abolished

GB 6738-1986 Safety requirements for indicating and recording electrical measuring instruments and their accessories

Publish Date: 1986-07-31

GB/T 9393-1988 Replaced

GB/T 9393-1988 STZ3 type connector for electronic measurement instrument

Publish Date: 1988-06-17

GB/T 12114-1989 Replaced

GB/T 12114-1989 Generic specification of high frequency signal generators

Publish Date: 1989-12-29

GB/T 12115-1989 Replaced

GB/T 12115-1989 Measuring methods for high frequency signal generators

Publish Date: 1989-12-29

GB/T 12116-1989 Replaced

GB/T 12116-1989 Generic specification for electronic analog voltmeters

Publish Date: 1989-12-29

GB/T 12117-1989 Replaced

GB/T 12117-1989 Measuring methods for electronic analog voltmeters

Publish Date: 1989-12-29