GB/T 3750.3-1983
Replaced
GB/T 5785-2025
Active
National standards
GB/T 5785-2025 Fasteners—Hexagon head bolts—Fine pitch thread
GB/T 5785-2025 Fasteners—Hexagon head bolts—Fine pitch thread
Price:
$ 66
Basic Information
Standard Code:
GB/T 5785-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fasteners
ICS Name:
Bolts, screws, and studs
Publish Date:
2025-10-31
Implement Date:
2026-02-01
Pages:
20 pages
Scope
This document specifies the type, dimensions, technical requirements, marking, labeling, and identification of A and B grade fine-thread hexagonal head bolts.
This document applies to bolts with a nominal thread diameter of 8 mm to 64 mm, fine-thread, with performance grades of 8.8, 10.9, 12.9/12.9, A2-50, A2-70, A4-50, A4-70, A4-80, D4-70, D4-80, D6-70, D6-80, and product grades of A and B, made from steel and stainless steel (hereinafter referred to as "bolts").
Development Information
Replace the following standards
Referenced Standards
GB/T 2-2001 Fasteners—Ends of parts with external thread
GB/T 2-2016 Fasteners—Ends of parts with external thread
GB/T 90.1-2002 Fasteners—Acceptance inspection
GB/T 90.1-2023 Fasteners—Acceptance inspection
GB/T 90.2-2002 Fasteners—Marking and packaging
GB/T 197-2003 General purpose metric screw threads—Tolerances
GB/T 197-2018 General purpose metric screw threads—Tolerances
GB/T 1237-2000 Designation system for fasteners
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.6-2000 Mechanical properties of fasteners—Bolts, screws and studs made of stainless-steel
GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs
GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts,screws and studs
GB/T 3098.23-2020 Mechanical properties of fasteners—M42～M72 bolts,screws and studs
GB/T 3099.4-2021 Terminology of fasteners—Control,inspection,delivery,acceptance and quality
GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts
GB/T 3106-2016 Fasteners—Bolts,screws and studs—Nominal lengths and thread lengths
GB/T 5267.1-2002 Fasteners—Electroplated coatings
GB/T 5267.1-2023 Fasteners—Electroplate coating
GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings
GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings
GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings
GB/T 5276-2015 Fasteners—Bolts,screws,studs and nuts—Symbols and descriptions of dimensions
GB/T 5779.1-2000 Fasteners—Surface discontinuities—Bolts,screws and studs for general requirements
GB/T 5779.3-2000 Fasteners—Surface discontinuities—Bolts,screws and studs for special requirements
GB/T 9144-2003 General purpose metric screw threads—Preferable plan
GB/T 9144-2025 General purpose metric screw threads—Preferable plan
GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts
GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts
Adopt standards
ISO 8765:2022
Related Standards
GB/T 5277-1985
Active
GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws
GB/T 6560-1986
Replaced
GB/T 6560-1986 Cross recessed pan head thread forming screws
GB/T 6561-1986
Replaced
GB/T 6561-1986 Cross recessed countersunk head thread forming screws
GB/T 6562-1986
Replaced
GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws
GB/T 6563-1986
Replaced