GB/T 14293-1998
Active
YS/T 873-2013
Active
Industry standards-Non-ferrous metals
YS/T 873-2013 Specification of polishing coating on aluminum alloy
YS/T 873-2013 Specification of polishing coating on aluminum alloy
Basic Information
Standard Code:
YS/T 873-2013
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Non-ferrous metals and their alloy products
ICS Name:
Surface treatment and plating coating combined
Publish Date:
2013-04-25
Implement Date:
2013-09-01
Pages:
11 pages
Scope
This standard specifies the terms, definitions, performance requirements, test methods, inspection rules, etc. of the anodized film on the polished surface of aluminum alloys.
This standard applies to the surface of aluminum and aluminum alloys that have undergone mechanical polishing and/or chemical polishing (or electrolytic polishing), and the film formed after surface treatment by anodizing, electrolytic coloring (or dyeing), etc. (hereinafter referred to as the anodized film on the polished surface).
This standard applies to the anodized film on the polished surface of aluminum and aluminum alloys used in furniture, lighting, electronics and electrical appliances, automobiles, and other industries.
Development Information
Referenced Standards
GB/T 8013.1-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1:Anodic oxide coatings
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 8005.3-2008 Aluminium and aluminium alloys—Terms and definitions—Part 3:Surface treatment
GB/T 8752-1988 Anodizing of aluminium and aluminium alloys—Check of continuity of thin anodic oxide coatings—Copper sulphate test
GB/T 8752-2006 Anodizing of aluminium and its alloys—Check of continuity of thin anodic oxide coating—Copper sulphate test
GB/T 8753.1-2005 Anodizing of aluminium and aluminium alloys—Assessment of quality of sealed anodic oxide coatings—Part 1:Phosphoric acid/chromic acid test without nitric acid predip
GB/T 8753.1-2017 Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1:Measurement of the loss of mass after immersion in acid solution(s)
GB/T 8753.3-2005 Anodizing of aluminium and aluminium alloys—Assessment of quality of sealed anodic oxide coatings—Part 3:Admittance test
GB/T 8753.4-2005 Anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings—Part 4 Dye spot test with prior acid treatment
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys—Measurmeent of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus
GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys—Part 1:Measurement of abrasion resistance
GB/T 12967.3-1991 Anodizing of aluminium and aluminium alloys—Copper accelerated acetic acid salt spray test for anodic oxide coatings (CASS test)
GB/T 12967.3-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 3:Copper accelerated acetic acid salt spray test(CASS test)
GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3:Salt spray test
GB/T 12967.4-1991 Anodizing of aluminium and aluminium alloys—Determination of the fastness to ultraviolet light of coloured anodic oxide coatings
GB/T 12967.4-2014 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
GB/T 12967.4-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4:Determination of ultraviolet light and heat resistance
GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6:Determination of color and appearance
GB/T 20503-2006 Anodizing of aluminium and its alloys—Measurement of specular reflectance and specular gloss at angles of 20°,45°,60°or 85°
Related Standards
GB/T 18178-2000
Active
GB/T 18178-2000 General rules of the selection for painting system of water paint
GB/T 18179-2000
Active
GB/T 18179-2000 Metallic coatings—Porosity tests—Humid sulfur(flowers of sulfur) test
GB/T 12334-2001
Active
GB/T 12334-2001 Metallic and other inorganic coatings—Definitions and conventions concerning the measurement of thickness
GB/T 18719-2002
Active
GB/T 18719-2002 Thermal spraying—Terminology, classification
GB/T 11377-2005
Active