GB/T 17995-1999
Abolished
GB/T 9706.266-2025
Pending
National standards
GB/T 9706.266-2025 Medical electrical equipment—Part 2-66:Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
GB/T 9706.266-2025 Medical electrical equipment—Part 2-66:Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
Basic Information
Standard Code:
GB/T 9706.266-2025
Standard Type:
National standards
Standard Status:
Pending
is_force_gb:
no
CCS Name:
Electroacoustic devices
ICS Name:
Other medical equipment
Publish Date:
2025-12-31
Implement Date:
2026-07-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国电声学标准化技术委员会(SAC/TC 23)
Pages:
48 pages
Scope
本文件规定了助听器和助听器系统的基本安全。本文件适用于助听器和助听器系统(以下简称ME设备和ME系统)。
如果一章或一条明确指出仅适用于助听器或助听器系统,标题和章或条的正文会说明。如果不是这种情况,与此相关的章或条同时适用于助听器和助听器系统。
除201.7.9.2和201.9.6外,本文件范围内的助听器或助听器系统的预期生理效应所导致的危险(源) 在本文件中没有具体要求。
注1:见通用标准的4.2。
家庭护理环境中,助听器附件(如遥控器、音频流处理器,电池充电器,供电电源)能根据适用的标准进行测试,如GB 4943.1或其他适用的安全标准。或者通用标准也可适用。助听器没有预期与交流供电网相连的网电源部分。助听器系统与供电网通过供电电源、充电器或其他类型的附件连接。
与助听器有功能连接的附件可组成助听器系统。在正常使用时与助听器没有物理连接的助听器相关附件不认为是应用部分,因为这些附件对助听器的预期用途无直接贡献。
Development Information
Drafting Units:
江苏省医疗器械检验所、中国电子科技集团公司第三研究所、索诺瓦听力技术(上海)有限公司、唯听西万拓听力技术(上海)有限公司
Drafting Persons:
缪佳、范庭波、胡济民、李宁、崔键、张世军、夏庆伟
Referenced Standards
GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization
GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity
GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization
GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization
GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics
GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances
GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents
GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials
GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process
GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices
GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials
GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices
GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use
GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 27701-2011 Mechanical safety of cathode ray tubes
GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application
GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems
YY/T 0316-2016 Medical devices—Application of risk management to medical devices
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements
YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY/T 0664-2008 Medical device software—Software life cycle processes
YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
ISO 2882
ISO 3864-1:2002
ISO 7000:2004
ISO 7010:2011
ISO 9614-1
ISO 80000-1:2009
IEC 60601-1-6
IEC 60730-1:2010
IEC 60851-3:2009
IEC 60851-5:2008
GB 4943.1-2011 Information technology equipment—Safety—Part 1:General requirements
GB 4943.1-2022 Audio/video,information and communication technology equipment—Part 1:Safety requirements
GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance
GB/T 25102.13-2010 Electroacoustics—Hearing aids—Part 13:Electromagnetic compatibility(EMC)
GB/T 25102.100-2010 Electroacoustics—Hearing aids—Part 0:Measurement of electroacoustical characteristics
YY/T 0664-2008 Medical device software—Software life cycle processes
YY/T 0664-2020 Medical device software—Software life cycle processes
YY/T 9706.106-2021 Medical electrical equipment—Part 1-6:General requirements for basic safety and essential performance—Collateral Standard:Usability
YY 9706.111-2021 Medical electrical equipment—Part 1-11:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
Adopt standards
IEC 60601-2-66:2019
Related Standards
GB/T 18990.1-2003
Replaced
GB/T 18990.1-2003 Luteinizing hormone(LH)test strip—Part 1:Ovulation test strip
GB/T 18990.2-2003
Replaced
GB/T 18990.2-2003 Luteinizing hormone(LH) test strip—Part 2:Sterility test strip
GB/T 18990.3-2003
Replaced
GB/T 18990.3-2003 Luteinizing hormone(LH) test strip Part 3:Contraceptive test strip
YY 0476-2004
Abolished
YY 0476-2004 Irrigating solutions for ophthalmic surgery
YY 0477-2004
Replaced