GB/T 3454-1982
Replaced
GB/T 18233-2008
Replaced
National standards
GB/T 18233-2008 Information technology—Generic cabling for customer premises
GB/T 18233-2008 Information technology—Generic cabling for customer premises
Basic Information
Standard Code:
GB/T 18233-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nSystem device interface
ICS Name:
Interfaces and interconnecting devices
Publish Date:
2008-08-19
Implement Date:
2009-01-01
Pages:
96 pages
Scope
This standard specifies the general cabling used in building complexes, which may consist of one or multiple buildings within a campus. It includes balanced cabling and fiber optic cabling. This standard is most suitable for building complexes where the maximum distance over which telecommunications services can be distributed is 2,000 meters. The principles of this standard can also be applied to larger-scale installations. The cabling defined in this standard supports a wide range of services, including voice, data, text, images, and video.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 2421-1999 Environmental testing for electric and electronic products—Part 1:General and guidance
GB/T 2421-2020 Environmental testing—General and guidance
GB/T 2421.1-2008 Environmental testing for electric and electronic products—General and guidance
GB/T 2421.2-2008 Environmental testing for electric and electronic products—Information for specification writers—Test summaries
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB/T 2423.34-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test Z/AD:Composite temperature/ humidity cyclic test
GB/T 2423.34-2012 Environmental testing—Part 2:Test methods—Test Z/AD:Composite temperature/humidity cyclic test
GB/T 2423.34-2024 Environmental testing—Part 2:Test methods—Test Z/AD:Composite temperature/humidity cyclic test
GB/T 5095.2-1997 Electromechanical components for electronic equipment Basic testing procedures and measuring methods—Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 7424.3-2003 Optical fibre cables—Part 3:Section specification-Outdoor cables
GB/T 7424.3-2025 Optical fibre cables—Part 3:Sectional specification—Outdoor cables
GB/T 12357.1-2004 Multimode optical fibres for telecommunication Part 1:Sectional specification for category A1 multimode fibres
GB/T 12357.1-2015 Multimode optical fibres for telecommunication—Part 1:Sectional specification for category A1 multimode fibres
GB/T 12357.1-2024 Multimode optical fibres for telecommunication—Part 1:Sectional specification for category A1 multimode fibres
GB/T 12507.1-2000 Connectors for optical fibres and cables Part 1:Generic specification
GB/T 15157.7-2002 Connectors for frequencies blow 3MHz for use with printed boards—Part 7:Detail specification for connectors,8-way,including fixed and free connectors with common mating features, with assessed quality
GB/T 15972.40-2008 Specifications for optical fibre test methods—Part 40:Measurement methods and test procedures for transmission and optical characteristics—Attenuation
GB/T 15972.40-2024 Specifications for optical fibre test methods—Part 40:Measurement methods and test procedures for transmission characteristics—Attenuation
GB/T 15972.41-2008 Specifications for optical fibre test methods—Part 41:Measurement methods and test procedures for transmission and optical characteristics—Bandwidth
GB/T 15972.41-2021 Specifications for optical fibre test methods—Part 41: Measurement methods and test procedures for transmission characteristics—Bandwidth
GB/T 15972.44-2008 Specifications for optical fibre test methods—Part 44:Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength
GB/T 15972.44-2017 Specifications for optical fibre test methods—Part 44:Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength
GB/T 15972.49-2008 Specifications for optical fibre test methods—Part 49:Measurement methods and test procedures for transmission and optical characteristics—Differential mode delay
GB 16895.1-1997 Electrical installations of buildings Part 1:Scope, object and fundamental principles
GB/T 16895.1-2008 Low-voltage electrical installations—Part 1:Fundamental principles,assessment of general characteristics,definitions
GB/T 18015.1-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 1:Generic specification
GB/T 18015.2-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 2:Horizontal floor wiring—Section specification
GB/T 18015.3-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 3:Work area wiring—Sectional specification
GB/T 18015.4-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 4:Riser cables—Sectional specification
GB/T 18015.5-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 5:Symmetrical pair/quad cables with transmission characteristics up to 600MHz—Horizontal floor wiring—Sectional specification
GB/T 18015.6-2007 Multicore and symmetrical pair/quad cables for digital communications—Part 6:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz—Work area wiring—Sectional specification
GB/T 18290.3-2000 Solderless connections—Part 3:Solderless accessible insulation displacement connections—General requirements, test methods and practical guidance
GB/T 18290.4-2000 Solderless connections—Part 4:Solderless non-accessible insulation displacement connections—General requirements, test methods and practical guidance
GB/T 18310.2-2001 Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-2:Tests—Mating durability
GB/T 18311.6-2001 Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-6:Examinations and measurements—Return loss
GB/T 18311.34-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures—Part 3-34:Examinations and measurements—Attenuation of random mated connectors
IEC 60027 (所有部分)
IEC 60352-6
IEC 60512-25-1
IEC 60512-25-2:2002
IEC 60512-25-4:2001
IEC 60512-25-5
IEC 60603-7-1:2002
IEC 60603-7-7:2002
IEC 60793-2 (所有部分)
IEC 60793-2-50
IEC 60794-2:1998
IEC 60825(所有部分)
IEC 60874-14(所有部分)
IEC 60874-19(所有部分)
IEC 60874-19-1:1999
IEC 60874-19-2:1999
IEC 60874-19-3:1999
IEC 61073-1
IEC 61073-3-104:2002
IEC 61156(所有部分)
IEC 61753-1-1:2000
IEC 61935-1:2000
IEC 61935-2
ISO/IEC TR 14763-1
ISO/IEC TR 14763-2
ISO/IEC TR 14763-3
ISO/IEC 18010:2002
ITU-T Rec.G.652:1993
Adopt standards
ISO/IEC 11801:2002
Related Standards
GB/T 12056-1989
Abolished
GB/T 12056-1989 Data processing—Description of interface between process computing system and technical process
GB/T 12057-1989
Active
GB/T 12057-1989 General purpose 37-position and 9-position interface for data terminal equipment and data circuit-terminating equipment employing serial binary data interchange
GB/T 14241-1993
Active
GB/T 14241-1993 Information processing—Processor system bus interface (Eurobus A)
GB/T 15123-1994
Replaced
GB/T 15123-1994 Information processing—Data communication—DTE/DCE interface back-up control operation using the 25-pole connector
GB/T 15125-1994
Active