GB/T 17213.1-1998
Replaced
GB/T 8464-2023
Active
National standards
GB/T 8464-2023 Cast iron,copper and stainless steel valves with screwed connections
GB/T 8464-2023 Cast iron,copper and stainless steel valves with screwed connections
Price:
$ 93
Basic Information
Standard Code:
GB/T 8464-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nValve
ICS Name:
\nValve Comprehensive
Publish Date:
2023-03-17
Implement Date:
2023-10-01
Pages:
29 pages
Scope
This document specifies the structural types, materials, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of gate valves, shut-off valves, ball valves, and check valves made of iron, copper, and stainless steel with threaded connections.
This document applies to:
Gray cast iron valves with a nominal pressure not exceeding PN16 and a nominal size not exceeding DN100.
Malleable cast iron valves and nodular cast iron valves with a nominal pressure not exceeding PN25 and a nominal size not exceeding DN100.
Copper alloy valves and stainless steel valves with a nominal pressure not exceeding PN40 and a nominal size not exceeding DN100.
Working temperatures not exceeding 180 °C, and working media such as water, non-corrosive liquids, air, and saturated steam.
Note 1: In this document, valves refer to gate valves, shut-off valves, ball valves, or check valves with threaded connections.
Note 2: The working media of valves with a nominal size greater than or equal to DN50 do not include air and saturated steam.
Development Information
Replace the following standards
Referenced Standards
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 1176-1987 Specification for cast copper alloys
GB/T 1176-2013 Casting copper and copper alloys
GB/T 1220-1992 Stainless steel bars
GB/T 1220-2007 Stainless steel bars
GB/T 4380-2004 Assessment of departure from roundness—Two-and three-point methods
GB/T 5750.6-2006 Standard examination methods for drinking water— Metal parameters
GB/T 5750.6-2023 Standard examination methods for drinking water—Part 6:Metal and metalloid indices
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9440-1988 Malleable iron castings
GB/T 9440-2010 Malleable iron castings
GB/T 12221-1989 Metal valves for use in flanged pipe systems—Face-to -face and centre-to-face dimensions
GB/T 12221-2005 Metal valves—Face to face,end to end,center to face and center to end dimensions
GB/T 12224-1989 General requirements for industrial steel valves
GB/T 12224-2005 General requirements for industrial steel valves
GB/T 12224-2015 General requirements for industrial steel valves
GB/T 12225-1989 General purpose industrial valves—Specification of copper alloy castings
GB/T 12225-2005 General purpose industrial valves—Specification of copper alloy castings
GB/T 12225-2018 General purpose industrial valves—Specification of copper alloy castings
GB/T 12226-1989 General purpose industrial valves—Specification of flake graphite iron castings
GB/T 12226-2005 General purpose industrial valves—Specification of flake graphite iron castings
GB/T 12227-1989 General purpose industrial valves—Specification of spheroidal graphite iron castings
GB/T 12227-2005 General purpose industrial valves—Specification of spheroidal graphite iron castings
GB/T 12230-1989 General purpose industrial valves—Specification of austenitic steel castings
GB/T 12230-2005 General purpose industrial valves—Specification of stainless steel castings
GB/T 12230-2023 General purpose industrial valves—Specification of stainless steel castings
GB/T 12716-2002 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads
GB/T 12716-2011 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
GB/T 15530.8-1995 Specifications for copper alloy and composite flanges
GB/T 17241.7-1998 Specifications for cast iron pipe flanges
GB/T 29528-2013 Specification of copper alloy forgings for valves
GB/T 35741-2017 Specification of stainless steel forgings for industrial valves
QB/T 5257-2018 Polytetrafluoroethylene (PTFE) sheet
GB/T 12221-2025 Metal valves—Face to face,end to end,centre to face and centre to end dimensions
GB/T 12226-2025 General purpose industrial valves—Technical specification for gray iron castings
GB/T 12227-2025 General purpose industrial valves—Technical specification for ductile iron castings
Related Standards
GB/T 17213.5-1998
Replaced
GB/T 17213.5-1998 Industrial-process control valves—Part 5:Marking
GB/T 17213.7-1998
Replaced
GB/T 17213.7-1998 Industrial-process control valves—Part 7:Control valve data sheet
GB/T 17213.8-1998
Replaced
GB/T 17213.8-1998 Industrial-process control valves—Part 8:Noise considerations Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T 12222-2005
Replaced
GB/T 12222-2005 Multi-turn valve actuator attachments
GB/T 12223-2005
Replaced