GB/T 35741-2017 Specification of stainless steel forgings for industrial valves

GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 226-1991 Etch test for macrostructure and defect of steels GB/T 226-2015 Test method for macrostructure and defect of steel by etching GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid GB/T 6394-2017 Determination of estimating the average grain size of metal GB/T 10561-1989 Steel—Determination of content of non-metallic inclusion—Micrographic method using standard diagrams GB/T 10561-2005 Steel—Determination of content of nonmetallic inclusions—Micrographic method using standards diagrams GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel—Micrographic method using standard diagrams GB/T 13305-1991 Austenitic stainless steels—Determination of area content of the α-phase—Micrographic method using standard diagrams GB/T 13305-2008 Micrographic method for determining area content of the α-phases in stainless steels GB/T 13305-2024 Method for determining content of the α-phase in stainless steels GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition JB/T 6902-2008 Check method for liquid penetration in valves JB/T 6903-2008 JB/T 7928-2014 Industrial Valve Supply Requirements JB/T 7928-1999 JBT 7928-1999 General valve Supply requirements NB/T 47010-2017 Stainless steel and heat-resistant steel forgings used in pressure equipment NB/T 47010-2010 Stainless and heat-resisting steel forgings for pressure equipments