GB 18442-2001
Replaced
GB/T 18442.4-2011
Replaced
National standards
GB/T 18442.4-2011 Static vacuum insulated cryogenic pressure vessel—Part 4:Fabrication
GB/T 18442.4-2011 Static vacuum insulated cryogenic pressure vessel—Part 4:Fabrication
Basic Information
Standard Code:
GB/T 18442.4-2011
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Gas separation and liquefaction equipment
ICS Name:
Low-temperature container
Publish Date:
2011-11-21
Implement Date:
2012-05-01
Pages:
17 pages
Scope
1.1 This part specifies the basic requirements for the manufacture of fixed vacuum-insulated cryogenic pressure vessels (hereinafter referred to as cryogenic vessels).
1.2 The scope of application of this part is the same as that of Part 1 of this standard.
Development Information
Same series standard
GB/T 18442.1-2011 Static vacuum insulated cryogenic pressure vessel—Part 1:General requirements
GB/T 18442.2-2011 Static vacuum insulated cryogenic pressure vessel—Part 2:Material
GB/T 18442.3-2011 Static vacuum insulated cryogenic pressure vessel—Part 3:Design
GB/T 18442.5-2011 Static vacuum insulated cryogenic pressure vessel—Part 5:Inspection and test
GB/T 18442.6-2011 Static vacuum insulated cryogenic pressure vessel—Part 6:Safety device requirements
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 18442.1-2011 Static vacuum insulated cryogenic pressure vessel—Part 1:General requirements
JB/T 4730.1
JB/T 4730.2
JB/T 4730.10
GB 150-1998 Steel pressure vessels
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 18442.2-2011 Static vacuum insulated cryogenic pressure vessel—Part 2:Material
GB/T 18442.2-2019 Static vacuum insulated cryogenic pressure vessels—Part 2:Materials
GB/T 18442.3-2011 Static vacuum insulated cryogenic pressure vessel—Part 3:Design
GB/T 18442.3-2019 Static vacuum insulated cryogenic pressure vessels—Part 3:Design
GB/T 25198-2010 Heads for pressure vessels
GB/T 25198-2023 Heads for pressure vessels
NB/T 47014-2023 Pressure equipment welding process qualification
NB/T 47015-2023 Stress vessel welding procedure
NB/T 47016-2023 The mechanical properties of welded specimens for pressure equipment products are tested
JB/T 4711-2003 Coating and packing for pressure vessels transport
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing
JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing
TSG R0004-2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets
Related Standards
GB/T 18443.3-2001
Replaced
GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels—Leakage measurement
GB/T 18443.4-2001
Replaced
GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels—Leak and outgassing rate measurement
GB/T 18443.5-2001
Replaced
GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels—Static vaporation rate measurement
GB/T 18442.1-2011
Replaced
GB/T 18442.1-2011 Static vacuum insulated cryogenic pressure vessel—Part 1:General requirements
GB/T 18442.2-2011
Replaced