GB/T 17466.24-2008 Replaced National standards

GB/T 17466.24-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24:Particular requirements for enclosures for housing protective devices and similar power consuming devices

Publish Date: 2008-12-30 Implement Date: 2010-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 17466.24-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Other electrical appliances

ICS Name: Wire conduit pipe

Publish Date: 2008-12-30

Implement Date: 2010-02-01

Pages: 20 pages

Scope

The provisions of GB 17466.1 have been replaced by:
This part of GB 17466 applies to the enclosures and their components of electrical accessories for fixed electrical installations intended for household and similar use, with a rated voltage not exceeding 400V and a total input load current not exceeding 125A. The maximum power consumption capacity under normal use is declared by the manufacturer.
These enclosures are intended for household protective devices and devices with or without power consumption. They are intended to be installed in situations where the expected short-circuit current does not exceed 10 kA, unless they are protected by current-limiting protection devices with a disconnecting current not exceeding 17 kA.

Development Information

Word Count: 34 Thousand words Pages: 20 pages

Same series standard

GB/T 17466.1-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements GB/T 17466.21-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21:Particular requirements for boxes and enclosures with provision for suspension means GB/T 17466.22-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22:Particular requirements for connecting boxes and enclosures GB/T 17466.23-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23:Particular requirements for floor boxe and enclosures

Superseded by the following standards

GB/T 17466.24-2017 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24:Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment

Referenced Standards

GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 17045-2006 Protection against electric shock—Common aspects for installation and equipment GB/T 17193-1997 Extra-heavy duty rigid steel conduits for electrical installations GB/T 17194-1997 Conduits for electrical purposes—Outside diameters of conduits for electrical installations and threads of conduits and fittings GB/T 16842-1997 Test probes to verify protection by enclosures GB/T 5465.22-2008 GB/T 19215.1-2003 Cable trunking and ducting systems for electrical installations—Part 1:General requirements GB/T 19215.2-2003 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 1:Cable trunking and ducting systems intended for mounting on walls or ceilings GB/T 19215.3-2012 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 2:Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations GB/T 19215.4-2017 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 4:Service poles GB/T 19215.5-2023 Cable trunking systems and cable ducting systems for electrical installations—Part 2:Particular requirements—Section 3:Slotted cable trunking systems intended for installation in cabinets

Adopt standards

IEC 60670-24:2005

Related Standards

GB/T 13381.1-1992 Abolished

GB/T 13381.1-1992 Specification for conduits for electrical installations General reguirements

Publish Date: 1992-01-30

GB/T 14823.1-1993 Abolished

GB/T 14823.1-1993 Particular specifications for metal conduits for electrical installations

Publish Date: 1993-12-30

GB/T 14823.2-1993 Abolished

GB/T 14823.2-1993 Particular specifications for rigid plain conduits of insulating materials for electrical installations

Publish Date: 1993-12-30

GB/T 14823.4-1993 Abolished

GB/T 14823.4-1993 Particular specifications for pliable self-recovering conduits of insulating materials for electrical installations

Publish Date: 1993-12-30

GB/T 15396-1994 Active

GB/T 15396-1994 Dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors

Publish Date: 1994-12-28

GB/T 17193-1997 Active

GB/T 17193-1997 Extra-heavy duty rigid steel conduits for electrical installations

Publish Date: 1997-12-26