GB/T 17466.1-2008 Replaced National standards

GB/T 17466.1-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements

GB/T 17466.1-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements

Publish Date: 2008-12-30 Implement Date: 2010-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 17466.1-2008
Standard Type: National standards
Standard Status: Replaced
is_force_gb: no
CCS Name: Other electrical appliances
ICS Name: Wire conduit pipe
Publish Date: 2008-12-30
Implement Date: 2010-02-01
Pages: 43 pages

Scope

This part of GB 17466 applies to electrical accessory installation boxes, enclosures, or enclosure components (hereinafter collectively referred to as "installation boxes" and "enclosures") for household and similar fixed electrical appliances used indoors or outdoors with a rated voltage not exceeding 1,000 V (AC) and 1,500 V (DC).
Note: The requirements for special types of installation boxes and enclosures are specified in the corresponding Part 2 of GB 17466.
Installation boxes and enclosures that comply with this part are suitable for use in environments with a temperature not exceeding 35 °C under normal conditions and occasionally reaching 40 °C.
Note: Considering the geographical and climatic environment of China, some regions of our country have a humid and tropical climate. Therefore, the ambient temperature for enclosures is specified as "not exceeding 35 °C under normal conditions and occasionally reaching 40 °C". In IEC 606701, the ambient temperature specified for this item is "not exceeding 25 °C under normal conditions and occasionally reaching 35 °C".
This part is applicable to electrical accessory installation boxes and enclosures for household circuit breakers and similar equipment (corresponding to IEC/SC 23E) in the National Electrical Accessory Standardization Technical Committee (TC 67) and the National Low-Voltage Electrical Apparatus Standardization Technical Committee (TC 189).
Note: This part can also be used as a reference document for other standardization technical committees and subcommittees.
Installation boxes and enclosures that become an integral part of electrical accessories and can protect them from external influences (such as mechanical impact, solid objects or water ingress, etc.) are applicable to the requirements of the relevant standards for these electrical accessories.
This part does not apply to:
——Ceiling lamp wiring boxes;
——Lighting support accessories;
——In

Development Information

Word Count: 77 Thousand words Pages: 43 pages

Same series standard

Replace the following standards

Superseded by the following standards

Referenced Standards

GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 17045-2006 Protection against electric shock—Common aspects for installation and equipment GB/T 17193-1997 Extra-heavy duty rigid steel conduits for electrical installations GB/T 17194-1997 Conduits for electrical purposes—Outside diameters of conduits for electrical installations and threads of conduits and fittings GB/T 16842-1997 Test probes to verify protection by enclosures GB/T 19215.1-2003 Cable trunking and ducting systems for electrical installations—Part 1:General requirements GB/T 19215.2-2003 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 1:Cable trunking and ducting systems intended for mounting on walls or ceilings GB/T 19215.3-2012 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 2:Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations GB/T 19215.4-2017 Cable trunking and ducting systems for electrical installations—Part 2:Particular requirements—Section 4:Service poles GB/T 19215.5-2023 Cable trunking systems and cable ducting systems for electrical installations—Part 2:Particular requirements—Section 3:Slotted cable trunking systems intended for installation in cabinets

Adopt standards

IEC 60670-1:2002

Related Standards

Contact Us