GB 6738-1986
Abolished
DB31/T 618-2012
Replaced
Shanghai CityLocal standards
DB31/T 618-2012 Electricity metering device configuration technical specification for power grid
DB31/T 618-2012 Electricity metering device configuration technical specification for power grid
Basic Information
Standard Code:
DB31/T 618-2012
Standard Type:
Local standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
The power system
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2012-08-20
Implement Date:
2012-09-01
Pages:
16 pages
Scope
This standard specifies the classification, general requirements, and equipment requirements of electrical energy metering devices.
This standard applies to the construction, modification, and operation management of electrical energy metering devices in the Shanghai power grid operating at 50 Hz AC and with a rated voltage of single-phase 220 V and three-phase 380 V to 500 kV.
Development Information
Superseded by the following standards
Referenced Standards
GB 1207-2006 Inductive voltage transformers
GB 1208-2006 Current transformers
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4703-2007 Capacitor voltage transformers
GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB 7251.3-1997 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2006 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2017 Low-voltage switchgear and controlgear assemblies—Part 3:Distribution boardsintended to be operated by ordinary persons(DBO)
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB/T 15284-2002 Particular requirements for multi-rate electricity meters
GB/T 16934-1997 Electric energy metering cubicle
GB/T 17215.301-2007 Particular requirements for multi-function electricity meters
GB/T 17215.321-2008 Electricity metering equipment(a.c.)—Particular requirements—Part 21:Static meters for active energy(classes 1 and 2)
GB/T 17215.3222008
GB/T 17215.323-2008 Electricity metering equipment(a.c.)—Particular requirements—Part 23:Static meters for reactive energy(classes 2 and 3)
GB 50058-2014 Code for design of electrical installations in explosive atmospheres
DL/T 825-2002 Instal lation and wiring connection rules for Electric energy metering device
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced