GB 6738-1986
Abolished
DB31/T 618-2022
Active
Shanghai CityLocal standards
DB31/T 618-2022 Electricity metering device configuration technical specification for power grid
DB31/T 618-2022 Electricity metering device configuration technical specification for power grid
Basic Information
Standard Code:
DB31/T 618-2022
Standard Type:
Local standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
The power system
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2022-10-11
Implement Date:
2023-01-01
Pages:
20 pages
Scope
This document specifies the classification, general requirements, and equipment and requirements of power metering devices in the power grid. This document is applicable to the new construction, modification, and operation management of power metering devices in the Shanghai power grid with a rated frequency of 50 Hz and voltage levels of single-phase 220 V and three-phase 380 kV to 500 kV.
Development Information
Replace the following standards
Referenced Standards
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB 7251.3-1997 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2006 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2017 Low-voltage switchgear and controlgear assemblies—Part 3:Distribution boardsintended to be operated by ordinary persons(DBO)
GB/T 11918.1-2014 Plugs,socket-outlet and couplers for industrial purposes—Part 1:General requirements
GB/T 11918.2-2014 Plug, socket-outlets and couplers for industrial purposes—Part 2:Dimensional compatibility and interchangeability requirements for pin and contact-tube accessories
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB/T 15284-2002 Particular requirements for multi-rate electricity meters
GB/T 15284-2022 Multi-rate electricity meters—Particular requirements
GB/T 16934-1997 Electric energy metering cubicle
GB/T 16934-2013 Electric energy metering cubicle
GB/T 17215.301-2007 Particular requirements for multi-function electricity meters
GB/T 17215.301-2024 Electricity metering equipment(AC)—Particular requirements—Part 1:Multi-function electricity meters
GB/T 17215.321-2008 Electricity metering equipment(a.c.)—Particular requirements—Part 21:Static meters for active energy(classes 1 and 2)
GB/T 17215.321-2021 Electricity metering equipment (AC)—Particular requirements—Part 21:Static meters for active energy(classes A,B,C,D and E)
GB/T 17215.323-2008 Electricity metering equipment(a.c.)—Particular requirements—Part 23:Static meters for reactive energy(classes 2 and 3)
GB/T 17215.323-2022 Electricity metering equipment (AC)—Particular requirements—Part 23:Static meters for reactive energy(classes 2 and 3)
GB/T 20840.1-2010 Instrument transformers—Part 1:General requirements
GB/T 20840.2-2014 Instrument transformers—Part 2:Additional requirements for current transformers
GB/T 20840.3-2013 Instrument transformers—Part 3:Additional requirements for inductive voltage transformers
GB/T 20840.5-2013 Instrument transformers—Part 5:Additional requirements for capacitor voltage transformers
DL/T 448-2016 The Technical Management Regulations for Electric Energy Measurement Devices
DL/T 825-2021
GB/T 11918.1-2025 Plugs,fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 1:General requirements
GB/T 11918.2-2025 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 2:Dimensional compatibility requirements for pin and contact-tube accessories
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced