GB/T 5982-1986
Replaced
GB/T 10395.26-2020
Active
National standards
GB/T 10395.26-2020 Agricultural and forestry machinery—Safety—Part 26:Large rotary mowers
GB/T 10395.26-2020 Agricultural and forestry machinery—Safety—Part 26:Large rotary mowers
Price:
$ 102
Basic Information
Standard Code:
GB/T 10395.26-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Agricultural machinery and equipment
ICS Name:
Harvesting equipment
Publish Date:
2020-11-19
Implement Date:
2021-06-01
Pages:
34 pages
Scope
This part specifies the safety requirements and verification rules for the design and manufacture of large rotary mowers used for cutting crop residues, grass, and small shrubs by impact force, with the cutting deck mounted on tractor or machines. The single cutting element of the mower has a cutting diameter of not less than 1,000 mm. This standard provides methods to eliminate or reduce the risks that may occur during the use of the machine and the risks that may reasonably be foreseen due to the operator's misuse during normal use and maintenance. This part specifies the types of safety operation information that manufacturers should provide.
Note 1: The machine can be used for cutting grass. This part does not specify additional requirements for the machine to be used outside agriculture.
This part does not apply to the following machines:
——GB/T 10395.25 relates to rotary disc mowers, drum mowers, and flail mowers for harvesting forage crops;
——large rotary cantilever mowers;
——step-by-step electric mowers;
——GB 10395.11 relates to power lawn mowers.
For machines designed and manufactured in accordance with this part, when the provisions of this part differ from those of GB 10395.1, the provisions of this part shall take precedence over those of GB 10395.1.
This part covers all major hazards, dangerous states, and dangerous events related to the use of large rotary mowers under the conditions anticipated and foreseen by the manufacturer. (A list of major hazards is provided in Appendix A.)
Note 2: The illustrations of the two types of mowers covered by this part (rigid platform large rotary mowers and tracked multi-segment folding wing large rotary mowers) are shown in C.1.
Note 3: The illustrations of the mowers are not covered in this part, see C.2.
This part does not cover environmental hazards, road safety, electromagnetic compatibility, vibration, and hazards related to power transmission co
Development Information
Same series standard
Referenced Standards
GB 10395.1-2009 Agricultural and forestry machinery—Safety—Part 1:General requirements
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB/T 229-1994 Metallic materials—Charpy notch impact test
GB/T 229-2007 Metallic materials—Charpy pendulum impact test method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T)
GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method
GB/T 1593-2015 Agricultural wheeled tractor—Rear-mounted three-point linkage—Categories 0、1N、1、2N、2、3N、3、4N and 4
GB/T 1593.1-1996 Agricultural wheeled tractors—Rear-mounted three-point linkage—Part 1:Categories 1,2,3 and 4
GB/T 1593.2-2003 Agricultural wheeled tractors—Rear mounted three-point linkage—Part 2:category 1N(Narrow hitch)
GB 1593.4-1987 Agricultural wheeled tractors—Three-point linkage—Part 4:Category 0
GB/T 1593.4-2004 Agricultural wheeled tractors—Rear mounted Three-point linkage—Part4:category 0
GB/T 9480-2001 Tractors machinery for agriculture and forestry,powered lawn and garden equipment—Operator's manuals—Content and presentation
GB/T 10395.25-2020 Agricultural and forestry machinery—Safety—Part 25:Rotary disc and drum mowers and flail mowers
GB 10396-1999 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB 10396-2006 Tractors,machinery for agriculture and forestry,powered lawn and garden equipment—Safety signs and hazard pictorials—General principles
GB/T 15706-2012 Safety of machinery—General principles for design—Risk assessment and risk reduction
GB/T 15706.1-1995 Safety of machinery—Basic concept, general principles for design—Part 1:Basic terminology, methodology
GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology
GB/T 15706.2-1995 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles and specifications
GB/T 15706.2-2007 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles
GB/T 17126.1-2009 Agricultural tractors and machinery—Power take-off drive shafts and power input connection—Part 1:General manufacturing and safety requirements
Adopt standards
ISO 4254-13:2012
Related Standards
GB/T 6979-1986
Replaced
GB/T 6979-1986 Terminology for grain harvesting machinery
GB/T 14178-1993
Replaced
GB/T 14178-1993 Measurement at the operator's position of airborne noise emitted by brush saws
GB/T 14179-1993
Replaced
GB/T 14179-1993 Brush saws—Measurements of hand-transmitted vibration
GB/T 14224-1993
Abolished
GB/T 14224-1993 Classification and terminology for machine of hay and forage harvesting
GB/T 14247-1993
Replaced