GB/T 18384.3-2015
Replaced
National standards
GB/T 18384.3-2015 Electrically propelled road vehicles—Safety specifications—Part 3:Protection of persons against electric shock
GB/T 18384.3-2015 Electrically propelled road vehicles—Safety specifications—Part 3:Protection of persons against electric shock
Basic Information
Standard Code:
GB/T 18384.3-2015
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
A car
ICS Name:
Comprehensive Road Vehicles
Publish Date:
2015-05-15
Implement Date:
2015-10-01
Pages:
18 pages
Scope
This part of GB/T 18384 specifies the requirements for preventing electric shocks to people inside and outside the vehicle in electric vehicles with electric drive systems and auxiliary systems for conductive connections (if any).
This part applies to electric vehicles with a maximum operating voltage of Class B voltage for on-board drive systems. Electric motorcycles and electric mopeds can refer to this standard for implementation.
This part does not apply to off-road vehicles, such as material handling vehicles and forklifts.
This part does not apply to guiding the assembly, maintenance, and repair of electric vehicles.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 2893-2001 Safety colors
GB 2893-2008 Safety colours
GB/T 2893.1-2004 Graphical symbols—Safety Colors and safety signs—Part1:Design principles for safety signs in workplaces and public areas
GB/T 2893.1-2013 Graphical symbols—Safety colours and safety signs—Part 1:Design principles for safetry signs and safety markings
GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels
GB/T 2893.2-2020 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels
GB/T 2893.3-2010 Graphical symbols—Safety colours and safety signs—Part 3:Design principles for graphical symbols for use in safety signs
GB/T 2893.4-2013 Graphical symbols—Safety colours and safety signs—Part 4:Colorimetric and photometric properties of safety sign materials
GB/T 2893.5-2020 Graphical symbols—Safety colours and safety signs—Part 5:Principles and requirements for the use of safety signs
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4943.1-2011 Information technology equipment—Safety—Part 1:General requirements
GB 4943.1-2022 Audio/video,information and communication technology equipment—Part 1:Safety requirements
GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests
GB/Z 16935.2-2013 Insulation coordination for equipment within low-voltage systems—Part 2-1:Application guide—Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing
GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 16935.3-2016 Insulation coordination for equipment within low-voltage systems— Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 16935.4-2011 Insulation coordination for equipment within low-voltage systems—Part 4:Consideration of high-frequency voltage stress
GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems—Part 5:Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
GB/Z 16935.6-2016 Insulation coordination for equipment within low-voltage systems—Part 2-2:Interface considerations—Application guide
GB/T 18384.1-2001 Electric vehicles—Safety specification—Part 1:On-board energy storage
GB/T 18384.1-2015 Electrically propelled road vehicles—Safety specifications—Part 1:On-board rechargeable energy storage system(REESS)
GB/T 19596-2004 Terminology of electric vehicles
GB/T 19596-2017 Terminology of electric vehicles
GB 2894-2025 Safety colours and safety signs
GB/T 16935.3-2025 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution
Adopt standards
ISO 6469-3:2011
Related Standards
GB/T 4352-1984
Replaced
GB/T 4353-1984
Replaced
GB/T 4353-1984 Fuel consumption for passenger vehicles in operation
GB/T 4971-1985
Replaced
GB/T 4971-1985 Terms and definitions—Automotive ride comfort
GB/T 5902-1986
Replaced
GB/T 5902-1986 Method of pulse input running test-Automobile ride comfort
GB/T 7031-1986
Replaced
GB/T 7031-1986 Vehicle vibration—Describing method for road surface irregularity
GB/T 918.1-1989
Abolished