GB/T 16662-1996
Replaced
GB/T 24603-2009
Replaced
National standards
GB/T 24603-2009 Boosting pressure water supply equipment for rectangular tank
GB/T 24603-2009 Boosting pressure water supply equipment for rectangular tank
Basic Information
Standard Code:
GB/T 24603-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Outdoor water supply and drainage projects
ICS Name:
The comprehensive facilities in the building
Publish Date:
2009-11-15
Implement Date:
2010-06-01
Pages:
15 pages
Scope
This standard specifies the terms and definitions, classification and models, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of box-type superimposed water supply equipment (hereinafter referred to as the equipment).
This standard applies to the design, production, and testing of box-type superimposed water supply equipment.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 3216-2005 Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 and 2
GB/T 3797-2005 Electrical control assemblies
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
JB 8
JG/T 3009
GB 150-1998 Steel pressure vessels
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 3047.1-1995 Series of basic dimensions of panels, rack and cabinets for vertical increment of 20mm
GB/T 3214-1991 Methods for measurement of capacity of pump
GB/T 3214-2007 Methods for measurement of capacity of pump
GB/T 5657-1995 Technical specifications for centrifugal pumps—Class Ⅲ
GB/T 5657-2013 Technical specifications for centrifugal pumps(Class Ⅲ)
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB 50015-2019 Standard for design of building water supply and drainage
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets
Related Standards
GB/T 16803-1997
Replaced
GB/T 16803-1997 Equipment of heating, ventilating,air conditioning and air cleaning terminology
GB 16895.2-1997
Replaced
GB 16895.2-1997 Electrical installations of buildings—Part 4:Protection for safety Chapter 42:Protection against thermal effects
JG/T 195-2007
Abolished
JG/T 195-2007 Thermostatic radiator valve
CJ/T 246-2007
Replaced
CJ/T 246-2007 Technical specification of preformed directly buried steam insulating pipeline accessories for municipal heat-supply
GB/T 16662-2008
Active