GB 4962-1985
Replaced
GB/T 43976-2024
Active
National standards
GB/T 43976-2024 Electronic gas—Tetrafluoromethane
GB/T 43976-2024 Electronic gas—Tetrafluoromethane
Basic Information
Standard Code:
GB/T 43976-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Industrial gases and chemical gases
ICS Name:
Industrial gases
Publish Date:
2024-04-25
Implement Date:
2024-11-01
Pages:
16 pages
Scope
This document specifies the technical requirements, inspection rules, marking, packaging, transportation, storage, and safety information for electronic-grade tetrafluoromethane, and describes the relevant test methods. This document is applicable to tetrafluoromethane prepared by industrial tetrafluoromethane purification.
Development Information
Referenced Standards
GB 190-1990 Labels for packages of dangerous goods
GB 190-2009 Packing symbol of dangerous goods
GB/T 601-2002 Chemical reagent Preparations of standard volumetric solutions
GB/T 601-2016 Chemical reagent—Preparations of reference titration solutions
GB/T 603-2002 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 603-2023 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 3723-1999 Sampling of chemical products for industrial use—Safety in sampling
GB/T 5099-1994 Seamless steel gas cylinders
GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders
GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders
GB/T 5832.3-2011 Determination of moisture in gases—Part 3:The method of Cavity Ring-Down Spectroscopy
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB 14193-1993 Rules for filling of liquefied gas cylinders
GB/T 14193-2009 Rules for filling of liquefied gas cylinders
GB 15258-1999 General rules for preparation of precautionary label for industrial chemicals
GB 15258-2009 General rules for preparation of precautionary label for chemicals
GB 16804-1997 Precautionary labels for gas cylinders
GB/T 16804-2011 Precautionary labels for gas cylinders
GB/T 28726-2012 Gas analysis—Gas chromatograph with helium ionization detector
GB 30000.25-2013 Rules for classification and labelling of chemicals—Part 25:Specific target organ toxicity—Single exposure
GB/T 33145-2016 Large capacity seamless steel gas cylinders
GB/T 33145-2023 Large capacity seamless steel gas cylinders
TSG 07-2019 Special equipment production and filling unit licensing rules
TSG 23-2021 Regulation on Safety Technology for Gas Cylinder
TSG R0005-2011 Supervision Regulation on Safety Technology for Transportable Pressure Vessel
GB/T 14193.1-2025 Rules for the filling of liquefied gas cylinders—Part1:Industrial gas cylinder
GB/T 5832.3-2025 Gas analysis—Determination of moisture in gases—Part 3:The method of cavity ring-down spectroscopy
GB/T 28726-2025 Gas analysis—Gas chromatograph with helium ionization detector
Related Standards
GB/T 8981-1988
Replaced
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 10627-1989
Replaced
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10628-1989
Replaced
GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods
GB 13548-1992
Replaced
GB 13548-1992 General principle of safety assessment for phosgene and its products plant
GB 13591-1992
Replaced