DZ/T 0101.12-1994
Active
JG/T 11-2009
Active
Industry standards-The construction industry
JG/T 11-2009 Welded hollow spherical node of space grid structures
JG/T 11-2009 Welded hollow spherical node of space grid structures
Basic Information
Standard Code:
JG/T 11-2009
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
-
ICS Name:
-
Publish Date:
2009-09-16
Implement Date:
2010-03-01
Pages:
14 pages
Scope
This standard specifies the terms and definitions, marking and specifications, requirements, test methods, inspection rules, acceptance, marking, packaging, transportation, and storage of welded hollow ball joints in steel grid structures. This standard is applicable to the quality control of welded hollow ball joints in grid structures, single-layer reticulated shells, and double-layer reticulated shells (curved-surface reticulated shells), as well as other spatial grid structures.
Development Information
Replace the following standards
Referenced Standards
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature
GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB/T 5117-1995 Carbon steel covered electrodes
GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118-1995 Low alloy steel covered electrodes
GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
GB/T 8110-1995 Welding wires for gas shielding arc welding of carbon and low alloy steels
GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
GB/T 8110-2020 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels
GB/T 10045-2001 Carbon steel flux cored electrodes for arc welding
GB/T 10045-2018 Tubular cored electrodes for non-alloy and fine grain steels
GB/T 14957-1994 Steel wires for melt welding
GB/T 17493-1998 Low alloy steel flux cored electrodes for arc welding
GB/T 17493-2008 Low alloy steel flux cored electrodes for arc welding
GB/T 17493-2018 Tubular cored electrodes for creep-resisting steels
GB/T 19879-2005 Steel plates for building structure
GB/T 19879-2015 Steel plate for building structure
GB/T 19879-2023 Steel Plate for building structure
GB 50205-2001 Code for acceptance of construction quality of steel structures
HG/T 2537-1993 Welding with carbon dioxide
JG/T 203-2007 Method for ultrasonic testing and classification for steel structures
JGJ 61-2003
JGJ 81-2002 Technical specification for Welding of steel structure of building
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
DZ 4-1981
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active