GB 7251.2-1997
Replaced
GB/T 14048.12-2025
Active
National standards
GB/T 14048.12-2025 Low-voltage switchgear and controlgear—Part 4-3:Contactors and motor-starters—Semiconductor controllers and semiconductor contactors for non-motor loads
GB/T 14048.12-2025 Low-voltage switchgear and controlgear—Part 4-3:Contactors and motor-starters—Semiconductor controllers and semiconductor contactors for non-motor loads
Basic Information
Standard Code:
GB/T 14048.12-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Control appliances
ICS Name:
Low-voltage switchgear and controllers
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国低压电器标准化技术委员会(SAC/TC 189)
Pages:
80 pages
Scope
本文件适用于将非电动机负载连接至电路的半导体控制器和半导体接触器,其额定电压不超过
1000 V AC。
其涵盖了以下用途:
——用于在导通状态和截止状态之间改变交流电路状态的操作;
——带或不带旁路开关电器;
——作为控制器,用于降低交流电压RMS值的振幅。
本文件不适用于:
——机电接触器(见GB/T 14048.4);
——与半导体控制器和半导体接触器相关的短路保护电器[见GB/T 14048.4(MPSD)]、
GB/T 14048.2和GB/T 14048.3);
——半导体电机控制器或软起动器电器(见GB/T 14048.6);
——半导体变流器[见GB/T 3859(所有部分)];
——固态继电器(见GB/T 36640);
——在爆炸性环境中使用产品[见GB/T 3836(所有部分)];
——软件和固件要求(见GB/Z 41912);
——网络安全方面(见GB/Z 43030)。
半导体控制器和半导体接触器中使用的接触器和控制电路电器被视为符合其相关产品标准
Development Information
Drafting Units:
上海电器科学研究院、苏州西门子电器有限公司、良信电器(海盐)有限公司、浙江正泰电器股份有限公司、上海电器科学研究所(集团)有限公司
Drafting Persons:
贾峰、姜蕾、黄银芳、朱映平、易颖
Same series standard
GB/T 14048.3-2025 Low-voltage switchgear and controlgear—Part 3:Switches,disconnectors,switch-disconnectors and fuse-combination units
GB/T 14048.6-2025 Low-voltage switchgear and controlgear—Part 4-2:Contactors and motor-starters—Semiconductor motor controllers,starters and soft-starters
GB/T 14048.10-2025 Low-voltage switchgear and controlgear—Part 5-2:Control circuit devices and switching elements—Proximity switches
GB/T 14048.16-2025 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) forrotating electrical machines
GB/T 14048.25-2025 Low-voltage switchgear and controlgear—Part 9-2:Active arc-fault mitigation systems—Optical-based internalarc-detection and mitigation devices
Replace the following standards
Referenced Standards
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 14048.1-2023 Low-voltage switchgear and controlgear—Part 1:General rules
GB/T 17045-2020 Protection against electric shock—Common aspects for installations and equipment
IEC 60445
IEC 60715
IEC 60730-1
IEC 60947-4-1
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-3-11
IEC 61000-3-12
IEC 61000-4-5
CISPR 11:2015
CISPR 11:2015/AMD1:2016
Adopt standards
IEC 60947-4-3:2020
Related Standards
GB/T 11022-1999
Replaced
GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards
GB/T 18858.1-2002
Replaced
GB/T 18858.1-2002 Low-voltage switchgear and control gear Controller-device interface(CDIs)—Part 1:General rules
GB/T 18858.3-2002
Replaced
GB/T 18858.3-2002 Low-voltage switchgear and control gear—Controller-Device interface(CDI)—Part 3:Device Net
GB/Z 18859-2002
Replaced
GB/Z 18859-2002 Enclosed low-voltage switchgear and controlgear Assemblies—Guide for testing under conditions of arcing due to internal fault
GB 14048.4-2003
Replaced