GB/T 14048.1-2023 Active National standards

GB/T 14048.1-2023 Low-voltage switchgear and controlgear—Part 1:General rules

GB/T 14048.1-2023 Low-voltage switchgear and controlgear—Part 1:General rules

Publish Date: 2023-11-27 Implement Date: 2024-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 14048.1-2023
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Low-voltage electrical equipment
ICS Name: Integrated switch devices and controllers
Publish Date: 2023-11-27
Implement Date: 2024-06-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国低压电器标准化技术委员会(SAC/TC 189)
Pages: 242 pages

Scope

本文件规定了低压开关设备和控制设备的一般规则和通用安全要求,它包括:
——定义;
——特性;
——电器的有关资料;
——正常使用、安装和运输条件,以及停用和拆卸;
——结构和性能要求;
——特性和性能验证;
——能效因素(见附录V);
——环境因素。
本文件适用于(当相关产品标准有要求时)低压开关设备和控制设备(以下简称“设备”或“电器”),该设备或电器用于连接至额定电压交流不超过1 000 V或直流不超过1 500 V的电路。1)

Development Information

Drafting Units:

上海电器科学研究院、上海电器科学研究所(集团)有限公司、常熟开关制造有限公司(原常熟开关厂)、浙江正泰电器股份有限公司、上海良信电器股份有限公司、施耐德电气(中国)有限公司上海分公司、上海电器股份有限公司人民电器厂、德力西电气有限公司、万可电子(天津)有限公司、西门子(中国)有限公司、浙江天正电气股份有限公司、浙江人民电器有限公司、杭州之江开关股份有限公司、厦门ABB低压电器设备有限公司、思贝尔电气有限公司、罗格朗低压电器(无锡)有限公司、泰科电子(深圳)有限公司、欧姆龙自动化(中国)有限公司、浙江金莱勒电气有限公司、浙江科瑞普电气有限公司、苏州万龙电气集团股份有限公司、上海正泰智能科技有限公司、青岛鼎信通讯股份有限公司、河北宝凯电气股份有限公司、华通机电股份有限公司、安德利集团有限公司、浙江明晖智能电气有限公司、瑞睿电气(浙江)有限公司、新驰电气集团有限公司、浙江巨邦电器股份有限公司、乐星电气(无锡)有限公司、苏州西门子电器有限公司、长城电器集团浙江科技有限公司、浙江大华技术股份有限公司、宁波奇乐电气集团有限公司、帝森克罗德集团有限公司、中机国际工程设计研究院有限责任公司、美高电气科技有限公司、共立自动化科技(宁波)有限公司、江苏米特物联网科技有限公司、宁波公牛低压电气有限公司、深圳市威可特电子科技有限公司、实德电气集团有限公司、无锡新宏泰电器科技股份有限公司、江苏洛乘电气科技有限公司、贵州泰永长征技术股份有限公司、浙江百宸电气有限公司、加西亚电子电器股份有限公司、乾友科技有限公司、上海量乘机电科技有限公司、浙江奥来电器有限公司、浙江奔一电气有限公司、厦门宏发开关设备有限公司

Drafting Persons:

尹天文、季慧玉、管瑞良、肖体锋、张广智、刘振忠、范琨、吴建宾、汪芳、栗惠、葛世伟、包志舟、戴水东、林清泉、苏海超、傅凯、高伟、杨景丛、范林、胡昌勇、程玉标、郭德鑫、王建华、孟磊、王志勇、刘忠、徐波、吴起军、夏初阳、陈俊、武建波、朱林、叶高培、刘明、冯立本、陈梁、王剑锋、徐象兵、彭君、张建兴、张慎虎、郝明、何凯强、陈雪琴、包革、薛建虎、潘斌华、黄正乾、杨剑锋、张新雨、曾谊、许文良、林凯、王仁远、张协利

Word Count: 470 Thousand words Pages: 242 pages

Replace the following standards

Referenced Standards

GB/T 2408-1996 Plastics—Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test GB/T 2421-2020 Environmental testing—General and guidance GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB/T 2423.18-2021 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution) GB/T 2893.2-2008 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels GB/T 2893.2-2020 Graphical symbols—Safety colours and safety signs—Part 2:Design principles for product safety labels GB/T 3956-2008 Conductors of insulated cables GB/T 4025-2010 Basic and safety principles for man-machine interface,marking and identification—Coding principles for indicators and actuators GB/T 4026-2019 Basic and safety principles for man-machine interface,marking and identification—Identification of equipment terminals,conductor terminations and conductors GB/T 4205-2010 Basic and safety principles for man-machine interface(MMI),marking and identification—Actuating principles GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement GB 4824-2013 Industrial,scientific and medical(ISM) radio-frequency equipment—Disturbance characteristics—Limits and methods of measurement GB 4824-2019 Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB 4824-2025 Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles GB/T 5169.10-2017 Fire hazard testing for electric and electronic products—Part 10:Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT) GB/T 5169.12-1999 Fire hazard testing for electric and electronic products—Test methods-Glow-wire flammability test on materials GB/T 5169.12-2006 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability test method for materials GB/T 5169.12-2013 Fire hazard testing for electric and electronic products—Part 12: Glowing/hot-wire based test methods—Glow-wire flammability index(GWFI) test method for materials GB/T 5169.12-2024 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability index (GWFI) test method for materials GB/T 9254.1-2021 Information technology equipment,multimedia equipment and receivers—Electromagnetic compatibility—Part 1:Emission requirements GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation GB/T 11026.2-2000 Guide for the determination of thermal endurance properties of electrical insulating materials Part 2:Choice of test criteria GB/T 11026.2-2012 Electrical insulating materials—Thermal endurance properties—Part 2:Choice of test criteria GB 13539.1-2002 Low-voltage fuses—Part 1:General requirements GB 13539.1-2008 Low-voltage fuses—Part 1:General requirements GB/T 13539.1-2015 Low-voltage fuses—Part 1:General requirements GB/T 14048.2-2020 Low-voltage switchgear and controlgear—Part 2:Circuit-breakers GB 14048.5-2001 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devices and switching element—Electromechanical control circuit devices GB/T 14048.5-2008 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devives and switching element—Electromechanical control circuit devices GB/T 14048.5-2017 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devices and switching element—Electromechanical control circuit devices GB/T 14048.16-2006 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) for rotating electrical machines GB/T 14048.16-2016 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) forrotating electrical machines GB/T 14048.16-2025 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) forrotating electrical machines GB/T 16855.1-2018 Safety of machinery—Safety-related parts of control systems—Part 1:General principles for design GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests GB/T 17045-2020 Protection against electric shock—Common aspects for installations and equipment GB/T 17464-2012 Connecting devices—Electrical copper conductors—Safety requirements for screw-type and screwless-type clamping units—General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2(included) GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.8-1998 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17626.34-2012 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment GB/Z 17799.6-2017 Electromagnetic compatibility—Generic standards—Immunity for power station and substation environments GB/T 18216.2-2002 Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c.—Equipment for testing, measuring or monitoring of protective measuring—Part 2:Insulation resistance GB/T 18216.2-2012 Electrical safety in low voltage distribution systems up to 1 000 V a.c.and 1 500 V d.c.—Equipment for testing, measuring or monitoring of protective measures—Part 2:Insulation resistance GB/T 18216.2-2021 Electrical safety in low voltage distribution systems up to 1 000 V a.c.and 1 500 V d.c.—Equipment for testing,measuring or monitoring of protective measures—Part 2:Insulation resistance GB/T 20636-2006 Connecting device—Electrical copper conductors—Safety requirements for screw-type and screwless-type clamping units Particular requirements for conductors above 35 mm2 up to 300 mm2 GB/T 34987-2017 Weibull analysis ISO 7000 IEC 60038 IEC 60092-504:2016 IEC TR 60344:2007 IEC 60417(所有部分) IEC 60529:1989 IEC 60529:1989/AMD1:1999 IEC 60529:1989/AMD2:2013 IEC 60617(所有部分) IEC 60947-5(所有部分) IEC 60981:2019 IEC 61000-6-2:2016 IEC 61131-2:2017 IEC 61439(所有部分) IEC 61508(所有部分) IEC 62061:2021 IEC 62474:2018

Adopt standards

IEC 60947-1:2020

Related Standards

Contact Us