GB/T 16603-2025 Active National standards

GB/T 16603-2025 Polyamide drawn yarns

GB/T 16603-2025 Polyamide drawn yarns

Publish Date: 2025-05-30 Implement Date: 2025-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 16603-2025
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Chemical fibers
ICS Name: Artificial fibers
Publish Date: 2025-05-30
Implement Date: 2025-12-01
Pages: 12 pages

Scope

This document specifies the technical requirements for nylon drawn filament, describes the corresponding test methods, and stipulates the inspection rules, marking, packaging, transportation, storage, and other aspects. It also provides the classification and labeling of the product. This document is applicable to nylon 6 and nylon 66 drawn filament for civilian use, with a nominal linear density of 5.0 dtex to 500.0 dtex (for twisted filament, the nominal linear density is before twisting), a single filament linear density of 0.2 dtex to 15.0 dtex, a round cross-section, and a glossy, semi-matt, or fully matt finish. The filament must be untwisted and not subjected to compression washing or heat setting. Other specifications and types of nylon drawn filament may be used as reference.

Development Information

Word Count: 13 Thousand words Pages: 12 pages

Replace the following standards

Referenced Standards

GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 4146-1984 Textile terms and terminology (Parts of chemical fibers) GB/T 4146.1-2009 Textiles—Man-made fibres—Part 1:Generic names GB/T 4146.1-2020 Textiles—Man-made fibres—Part 1:Generic names GB/T 4146.2-2017 Textiles—Man-made fibers—Part 2:Terms of products GB/T 4146.3-2011 Textiles—Man-made fibers—Part 3:Terms of inspection GB/T 6502-2001 Sampling method for synthetic filament yarns GB/T 6502-2008 Sampling method of man-made filament yarns GB/T 6503-2001 Test method for moisture regain in synthetic filament yarns GB/T 6503-2008 Testing method for moisture regain of man-made fibres GB/T 6503-2017 Man-made fibres—Test method of moisture regain GB/T 6504-2001 Test method for determination of oil synthetic filament yarns GB/T 6504-2008 Testing method for oil content of man-made fibres GB/T 6504-2017 Man-made fiber—Test method for oil content GB/T 6505-2001 Test method for thermal shrinkage of synthetic filament yarns GB/T 6505-2008 Testing method for thermal shrinkage of man-made filament yarns GB/T 6505-2017 Man-made fiber—Test method for thermal shrinkage of filament yarns(after treatment) GB/T 14343-2003 Testing method for linear density of synthetic filament yarns GB/T 14343-2008 Testing method for linear density of man-made filament yarns GB/T 14344-2003 Testing method for drawability of synthetic filament yarns GB/T 14344-2008 Testing method for tensile of man-made filament yarns GB/T 14344-2022 Man-made fibre—Test method for tensile properties of filament yarns GB/T 14346-1993 Testing method for yarn irregularity of man-made filament yarns by means of electronic evenness tester GB/T 14346-2015 Man-made fiber—Testing method for unevenness of filament yarns—Capacitance method GB/T 37632-2019 Man-made fiber—Test method for titanium dioxide content GB/T 38138-2019 Test methods of fiber grade polycaprolactam(PA6)chip FZ/T 50001-2005 Testing method for interlacing degree of synthetic filament yarns FZ/T 50001-2016 Test method for interlacing degree of synthetic filament yarns FZ/T 50008-1996 The test method for uniform dyeing of polyamide filament FZ/T 50008-2015 Test method for dyeing uniformity of polyamide filament yarns FZ/T 50054-2021 Man-made fiber—On-line and intelligent detection of appearance defects for yarn package

Related Standards

Contact Us