GB/T 6171-2016 Active National standards

GB/T 6171-2016 Hexagon nuts,style1—Fine pitch thread

GB/T 6171-2016 Hexagon nuts,style1—Fine pitch thread

Publish Date: 2016-02-24 Implement Date: 2016-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 6171-2016

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: \nNut

Publish Date: 2016-02-24

Implement Date: 2016-06-01

Pages: 7 pages

Scope

This standard specifies the type, dimensions, technical requirements, and marking of fine-thread Type 1 hexagonal nuts. This standard applies to hexagonal nuts with a nominal thread diameter of D=8 mm to 64 mm, performance grades of 6, 8, and 10, A250, A270, A450, A470, CU2, CU3, and AL4, and product grades of A and B for fine-thread hexagonal nuts. Grade A is used for nuts with D≤16 mm; Grade B is used for nuts with D>16 mm. Note: Due to the insufficient height of the nuts with fine-threaded threads, which results in a high rate of thread slippage, Type 2 hexagonal nuts can be used. See GB/T 6176 for details.

Development Information

Word Count: 11 Thousand words Pages: 7 pages

Replace the following standards

GB/T 6171-2000 Hexagon nuts,style 1,with fine pitch thread

Referenced Standards

GB/T 3098.10 GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 193-2003 General purpose metric screw threads—General plan GB/T 1237-2000 Designation system for fasteners GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts GB/T 3098.15-2000 Mechanical properties of fasteners—Nuts made of stainless-steel GB/T 3098.15-2014 Mechanical properties of fasteners—Stainless steel nuts GB/T 3098.15-2023 Mechanical properties of fasteners—Stainless steel nuts GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners GB/T 5276-2015 Fasteners—Bolts,screws,studs and nuts—Symbols and descriptions of dimensions GB/T 5779.2-2000 Fasteners—Surface discontinuities—Nuts GB/T 6176-2000 Hexagon nuts, style 2,with fine pitch thread GB/T 6176-2016 Hexagon nuts,style2—Fine pitch thread GB/T 9145-2003 General purpose metric screw threads—Limits of sizes for the screw threads of medium quality and preferable plan GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts

Adopt standards

ISO 8673:2012

Related Standards

GB/T 809-1988 Active

GB/T 809-1988 Insert round nuts

Publish Date: 1988-06-24

GB/T 1229-1991 Replaced

GB/T 1229-1991 High strength large hexagon nuts for steel structures

Publish Date: 1991-04-22

GB/T 17880.1-1999 Active

GB/T 17880.1-1999 Flat head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.2-1999 Active

GB/T 17880.2-1999 Countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.3-1999 Active

GB/T 17880.3-1999 Small countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.4-1999 Active

GB/T 17880.4-1999 120°Small countersunk head riveted nuts

Publish Date: 1999-10-11