GB/T 3098.15-2014 Replaced National standards

GB/T 3098.15-2014 Mechanical properties of fasteners—Stainless steel nuts

GB/T 3098.15-2014 Mechanical properties of fasteners—Stainless steel nuts

Publish Date: 2014-06-24 Implement Date: 2015-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 3098.15-2014

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Fasteners

ICS Name: \nNut

Publish Date: 2014-06-24

Implement Date: 2015-03-01

Pages: 23 pages

Scope

This part of GB/T 3098 specifies the mechanical properties of nuts made from austenitic, martensitic, and ferritic corrosion-resistant stainless steels when tested at an ambient temperature of 10 °C to 35 °C. Under higher or lower temperatures, their performance may vary.
The nuts applicable to this part:
——with a nominal thread diameter D ≤ 39 mm;
——with a diameter and pitch that comply with GB/T 192, GB/T 193, and GB/T 9144 for ordinary threads;
——of any shape;
——with a width of the flats that complies with the provisions of GB/T 3104;
——with a nominal height m ≥ 0.5D.
This part does not apply to nuts with the following performance requirements:
——locking performance;
——weldability.

Development Information

Word Count: 40 Thousand words Pages: 23 pages

Same series standard

GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs GB/T 3098.16-2014 Mechanical properties of fasteners—Stainless steel set screws GB/T 3098.21-2014 Mechanical properties of fasteners—Stainless steel tapping screws

Replace the following standards

GB/T 3098.15-2000 Mechanical properties of fasteners—Nuts made of stainless-steel

Superseded by the following standards

GB/T 3098.15-2023 Mechanical properties of fasteners—Stainless steel nuts

Referenced Standards

GB/T 90.3-2010 Fasteners—Quality assurance system GB/T 192-2003 General purpose metric screw threads—Basic profile GB/T 193-2003 General purpose metric screw threads—General plan GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners GB/T 9144-2003 General purpose metric screw threads—Preferable plan GB/T 3104-1982 Fasteners--Widths across flats of hexagon products GB/T 192-2025 General purpose metric screw threads—Profiles GB/T 9144-2025 General purpose metric screw threads—Preferable plan GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts

Adopt standards

ISO 3506-2:2009

Related Standards

GB/T 809-1988 Active

GB/T 809-1988 Insert round nuts

Publish Date: 1988-06-24

GB/T 1229-1991 Replaced

GB/T 1229-1991 High strength large hexagon nuts for steel structures

Publish Date: 1991-04-22

GB/T 17880.1-1999 Active

GB/T 17880.1-1999 Flat head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.2-1999 Active

GB/T 17880.2-1999 Countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.3-1999 Active

GB/T 17880.3-1999 Small countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.4-1999 Active

GB/T 17880.4-1999 120°Small countersunk head riveted nuts

Publish Date: 1999-10-11