CJ/T 322-2010 Abolished Industry standards-Urban construction

CJ/T 322-2010 Ozone generator for water and waste water treatment

CJ/T 322-2010 Ozone generator for water and waste water treatment

Publish Date: 2010-01-14 Implement Date: 2010-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: CJ/T 322-2010

Standard Type: Industry standards

Standard Status: Abolished

is_force_gb: no

CCS Name: -

ICS Name: -

Publish Date: 2010-01-14

Implement Date: 2010-06-01

Pages: 28 pages

Scope

This standard specifies the classification and specifications, structure and materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of ozone generators used in water treatment.
This standard applies to ozone generators used for domestic drinking water, recycled water, and wastewater treatment. Ozone generators used in applications such as chemical oxidation, paper bleaching, and food industry disinfection and sterilization can be implemented in accordance with this standard.

Development Information

Word Count: 39 Thousand words Pages: 28 pages

Replace the following standards

CJ/T 3028.1-1994 Stinky ozone generator CJ/T 3028.2-1994 CJ/T 3028.2-1994 Ozone Generator - Measurement of Ozone Concentration, Output, and Electricity Consumption

Referenced Standards

GB 3095-1996 Ambient air quality standard GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods GB 7521.1-2005 GB 150-1998 Steel pressure vessels GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 13306-1991 Plates GB/T 13306-2011 Plates GB/T 13384-1992 General specifications for packagings of mechanical and electrical products GB/T 13384-2008 General specifications for packing of mechanical and electrical product GB 14050-1993 Types and safety technical requirements of system earthing GB 14050-2008 Types and safety technical requirements of system earthing GB/T 15438-1995 Ambient air—Determination of ozone—Ultraviolet photometric method GB 19517-2004 National safety technical code for electric equipments GB 19517-2009 National safety technical code for electric equipments GB 19517-2023 National technical specification for the safety of electric equipments GB/T 191-2025 Graphical symbols marking for handling and storage of packages GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets

Related Standards

DZ/T 0101.12-1994 Active

DZ/T 0101.12-1994 Geological instrument manufacturing time quota for printed circuit board

Publish Date: 1994-01-27

JJG 204-1980 Active

JJG 204-1980 Meteorological Ventilation Psychrometer

Publish Date: 1980-07-11

SC 53-1980 Active

SC 53-1980 Transfer blade hydraulic steering gear repair quality standard

Publish Date: 1981-07-01

DZ 4-1981 Replaced

DZ 4-1981

Publish Date: 1981-08-20

SC 69-1982 Active

SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications

Publish Date: 1982-01-20

SC 72-1982 Active

SC 72-1982 Steel Fishing Boat Builder Quality Standards and Mooring Equipment Installation Technical Requirements

Publish Date: 1982-03-30