GB 6450-1986
Replaced
GB/T 37011-2018
Active
National standards
GB/T 37011-2018 Technical specification of transformers for VSC-HVDC applications
GB/T 37011-2018 Technical specification of transformers for VSC-HVDC applications
Basic Information
Standard Code:
GB/T 37011-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2018-12-28
Implement Date:
2019-07-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国变压器标准化技术委员会(SAC/TC 44)
Pages:
18 pages
Scope
本标准规定了柔性直流输电用变压器(也简称为柔直变压器)的术语和定义、符号和缩略语、产品结构与分类、产品型号、使用条件、技术要求、偏差、试验项目及方法、铭牌、标志、包装、运输和贮存。本标准适用于下列与模块化多电平电压源换流器连接的油浸式产品:--对称单极柔直变压器;--双极柔直变压器。
Development Information
Drafting Units:
南方电网科学研究院有限责任公司、沈阳变压器研究院股份有限公司、国家电网有限公司、机械工业北京电工技术经济研究所、特变电工沈阳变压器集团有限公司、特变电工衡阳变压器有限公司、国网经济技术研究院有限公司、中国电力科学研究院、保定天威保变电气股份有限公司、西安西电变压器有限责任公司、广东电网公司电力科学研究院、山东电力设备有限公司
Drafting Persons:
饶宏、章忠国、赵林杰、刘杰、程建伟、卢理成、郭振岩、雷园园、李锐海、李桂苹、马旭平、谭黎军、文卫兵、张书琦、王清璞、王粉芍、林春耀、谈翀、郭贤珊、杜晓磊、张涛
Referenced Standards
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
IEC/IEEE 65700-19-03
IEEE 693 变电站抗震设计推荐规程(Recommended Practice for Seismic Design of Substations)
GB 1094.1-1996 Power transformers—Part 1:General
GB/T 1094.1-2013 Power transformers—Part 1:General
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB/T 1094.10-2003 Power transformers—Part10:Determination of sound levels
GB/T 1094.10-2022 Power transformers—Part 10:Determination of sound levels
GB/T 2900.33-1993 Electrotechnical terminology—Power electronics
GB/T 2900.33-2004 Electrotechnical terminoligy—Power electronics
GB/T 2900.95-2015 Electrotechnical terminology—transformers,voltage regulators and reactors
GB/T 3859.1-1993 Semiconductor convertors—Specification of basic requirements
GB/T 3859.1-2013 Semiconductor converters—General requirements and line commutated converters—Part 1-1:Specification of basic requirements
GB/T 4109-1999 Technical specification of high voltage bushing
GB/T 4109-2008 Insulated bushings for alternating voltages above 1 000 V
GB/T 4109-2022 Insulated bushings for alternating voltages above 1 000 V
GB/T 10230.1-2007 Tap-changers—Part 1:Performance requirements and test methods
GB/T 10230.1-2019 Tap-changers—Part 1:Performance requirements and test methods
GB/T 10230.2-2007 Tap-changers—Part 2:Application guide
GB/T 17623-1998 Determination of componental contents of gases dissolved in insulating oil by gas chromatography method
GB/T 17623-2017 Determination of componental contents of gases dissolvedin insulating oil by gas chromatography method
GB/T 18494.2-2007 Convertor transformers—Part 2:Transformers for HVDC applications
GB/T 18494.2-2022 Convetor transformers—Part 2:Transformers for HVDC applications
GB/T 20838-2007 Specification and technical requirements of oil-immersed convertor transformers for HVDC applications
GB/T 30553-2014 High-voltage direct current power transmission using voltage sourced converters
GB/T 30553-2023 High-voltage direct current (HVDC) power transmission using voltage sourced converters(VSC)
JB/T 501-2021 Electric power transformer test guidelines
JB/T 501-2006 Electric power transformer test guidelines
JB/T 3837-2016 JB/T 3837-2016 Transformer product standard model numbering method
JB/T 501-1991 Electric power transformer test guidelines
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
GB/T 10230.2-2025 Tap changers—Part 2:Application guidelines
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced