GB/T 10560-1989 High tensile steels for round link chains for mines—Technical requirements

GB/T 10560-2008 High tensile steels of round link chains for mines

GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method) GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 225-1988 Steel-hardenability test by end quenching(Jominy test) GB/T 225-2006 Steel—Hardenability test by end quenching (Jominy test) GB/T 226-1991 Etch test for macrostructure and defect of steels GB/T 226-2015 Test method for macrostructure and defect of steel by etching GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 230.2-2002 Metallic rockwell hardness test—Part 2:Verification and calibration of hardness testers(scales A,B,C,D,E,F,G,H,K,N,T) GB/T 230.2-2012 Metallic materials—Rockwell hardness test—Part 2:Verification and calibration of testing machines GB/T 230.2-2022 Metallic materials—Rockwell hardness test—Part 2:Verification and calibration of testing machines and indenters GB/T 230.3-2002 Metallic rockwell hardness test—Part 3:Calibration of hardness reference blocks(scales A,B,C,D,E,F,G,H,K,N,T) GB/T 230.3-2012 Metallic materials—Rockwell hardness test—Part 3:Calibration of reference blocks(scales A,B,C,D,E,F,G,H,K,N,T) GB/T 230.3-2022 Metallic materials—Rockwell hardness test—Part 3:Calibration of reference blocks GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.2-2002 Metallic Brinell hardness test—Part 2:Verification and calibration of hardness testers GB/T 231.2-2012 Metallic materials—Brinell hardness test—Part 2:Verification and calibration of testing machines GB/T 231.2-2022 Metallic materials—Brinell hardness test—Part 2:Verification and calibration of testing machines GB/T 231.3-2002 Metallic Brinell hardness test—Part 3:Calibration of hardness reference blocks GB/T 231.3-2012 Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks GB/T 231.3-2022 Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks GB/T 231.4-2009 Metallic materials—Brinell hardness test—Part 4:Tables of hardness values GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance GB/T 702-2004 Hot-rolled round and square steel bars-Dimension,Shape,weight and tolerance GB/T 702-2008 Hot-rolled steel bars—Dimensions,shape,weight and tolerances GB/T 702-2017 Hot-rolled steel bars—Dimensions,shape,weight and tolerances GB/T 905-1994 Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels GB/T 1979-2001 Standard diagrams for macrostructure and defect of structural steels GB/T 1979-2025 Evaluation of macrostructural defects in structural steels—Acid etching method and ultrasonic testing method GB/T 2101-1989 General requirements of acceptance, packaging, marking and certification for section steel GB/T 2101-2008 General requirement of acceptance,packaging,marking,and certification for section steel GB/T 2101-2017 General requirement of acceptance,packaging,marking and certification for section steel GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 3077-1999 Alloy structure steels GB/T 3077-2015 Alloy structure steels GB/T 3078-1994 Technical requirements for quality structural steel cold drawn bars GB/T 3078-2008 Quality structural steel cold drawn bars GB/T 3078-2019 Quality structural steel cold drawn bars GB/T 6394-2002 Metal-methods for estimating the average grain size GB/T 6394-2017 Determination of estimating the average grain size of metal GB 6397 GB/T 10561-1989 Steel—Determination of content of non-metallic inclusion—Micrographic method using standard diagrams GB/T 10561-2005 Steel—Determination of content of nonmetallic inclusions—Micrographic method using standards diagrams GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel—Micrographic method using standard diagrams YB 31

DIN 17115-1972