GB/T 26610.1-2022 Active National standards

GB/T 26610.1-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 1:Basic requirements and implementation procedure

GB/T 26610.1-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 1:Basic requirements and implementation procedure

Publish Date: 2022-07-11 Implement Date: 2023-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 26610.1-2022

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pressure vessels, gas cylinders

Publish Date: 2022-07-11

Implement Date: 2023-02-01

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国锅炉压力容器标准化技术委员会(SAC/TC 262)

Pages: 34 pages

Scope

1.1 本文件规定了承压设备系统实施基于风险的检验（RBI)项目的基本要求与实施程序。
1.2 本文件规定的基本要求与实施程序适用于石油化工装置承压设备系统实施的RBI项目，其他工业承压设备系统实施的RBI项目也可参照使用。
1.3 本文件适用于承压设备系统中以下设备及相关零部件实施的RBI项目：
a) 压力容器及其全部承压零部件；
b) 过程装置界区内及界区间的压力管道及其全部承压管道元件；
c) 常压储罐；
d) 动设备中承受内压的壳体；
e) 锅炉与加热炉中的承压零部件；
f) 安全阀等安全泄放装置。
1.4 本文件不适用于承压设备系统中以下设备及相关零部件：
a) 仪表与控制设备；
b) 电气设备；
c) 建、构筑物；
d) 泵与压缩机中除泵壳与压缩机外壳以外的机械部件。

Development Information

Drafting Units:

合肥通用机械研究院有限公司、国家市场监督管理总局、中国特种设备检测研究院、中国石油化工股份有限公司、中国机械工业联合会、福建联合石油化工有限公司、大连西太平洋石油化工有限公司、中国石油天然气股份有限公司大庆石化分公司、中国石油化工股份有限公司天津分公司

Drafting Persons:

陈学东、陈钢、贾国栋、陈炜、寿比南、何承厚、王建军、王冰、范志超、艾志斌、杨铁成、胡久韶、谢国山、王辉、史进、顾望平、陶雪荣、陈颖锋、曲豫、王一民、李春树

Word Count: 67 Thousand words Pages: 34 pages

Same series standard

GB/T 26610.2-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 2:Risk-based inspection plan GB/T 26610.4-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 4:Quantitative analysis approach of failure likelihood GB/T 26610.5-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 5:Quantitative analysis approach of failure consequence

Replace the following standards

GB/T 26610.1-2011 Guideline for implementation of risk based inspection of pressure equipment system—Part 1:Basic requirements and implementation procedure

Referenced Standards

API RP 584 GB 150-1998 Steel pressure vessels GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 19624-2004 Safety assessment for in-service pressure vessels containing defects GB/T 19624-2019 Safety assessment of in-service pressure vessels containing defects GB/T 26610.2-2014 Guideline for implementation of risk-based inspection of pressure equipment system—Part 2:Risk-based inspection plan GB/T 26610.2-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 2:Risk-based inspection plan GB/T 26610.4-2014 Guideline for implementation of risk-based inspection of pressure equipment system—Part 4:Quantitative analysis approach of failure likelihood GB/T 26610.4-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 4:Quantitative analysis approach of failure likelihood GB/T 26610.5-2014 Guideline for implementation of risk-based inspection of pressure equipment system—Part 5:Quantitative analysis approach of failure consequence GB/T 26610.5-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 5:Quantitative analysis approach of failure consequence GB/T 30579-2014 Damage modes identification for pressure equipments GB/T 30579-2022 Damage modes identification for pressure equipments GB/T 35013-2018 Fitness-for-service assessment of pressure equipments GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets

Related Standards

GB/T 6058-1985 Replaced

GB/T 6058-1985 Method for preparation and internal pressure testing of filamentwound pressure vessels

Publish Date: 1985-05-28

GB 12136-1989 Abolished

GB 12136-1989 Arrester for dissolved acetylene cylinders

Publish Date: 1989-12-29

GB/T 13003-1991 Replaced

GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders

Publish Date: 1991-04-03

GB/T 13005-1991 Replaced

GB/T 13005-1991 Terminology of gas cylinders

Publish Date: 1991-04-30

GB 13076-1991 Replaced

GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders

Publish Date: 1991-07-12

GB 13077-1991 Replaced

GB 13077-1991 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders

Publish Date: 1991-07-12