CJ/T 260-2007
Abolished
CJ/T 456-2014
Active
Industry standards-Urban construction
CJ/T 456-2014 Boosting pressure water supply equipment with pneumatic tank
CJ/T 456-2014 Boosting pressure water supply equipment with pneumatic tank
Basic Information
Standard Code:
CJ/T 456-2014
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Water supply and drainage projects
ICS Name:
The water supply system
Publish Date:
2014-06-12
Implement Date:
2014-12-01
Pages:
24 pages
Scope
This standard specifies the terms and definitions, classification and models, environmental conditions, materials, requirements, test methods, inspection rules, marking, packaging, and storage of gas-pressurized superimposed water supply equipment.
This standard applies to the design, manufacture, and inspection of gas-pressurized superimposed water supply equipment (hereinafter referred to as the equipment).
Development Information
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 3797-2005 Electrical control assemblies
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 3047.1-1995 Series of basic dimensions of panels, rack and cabinets for vertical increment of 20mm
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5657-1995 Technical specifications for centrifugal pumps—Class Ⅲ
GB/T 5657-2013 Technical specifications for centrifugal pumps(Class Ⅲ)
GB/T 9119-2000 Slip-on-welding plate steel pipe flanges with flate face or raised face
GB/T 9119-2010 Slip-on-welding plate steel pipe flanges
GB/T 9123-2010 Steel pipe blank flanges
GB/T 9123.1-2000 Steel pipe blank flanges with flat face or raised face
GB/T 9123.2-2000 Steel pipe blank flanges with male and female face
GB/T 9123.3-2000 Steel pipe blank flanges with tongue and groove face
GB/T 9123.4-2000 Steel pipe blank flanges with ring-joint face
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 29529-2013 Methods of measuring and evaluating noise of pumps
CJ/T 352-2010 Variable-frequency governed speed water supply equipment with microcomputer control
GB 50236-2011 Code for construction and acceptance of field equipment, industrial pipe welding engineering
GB 50242-2002 Code for acceptance of construction quality of Water supply drainage and heating works
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
CJ/T 232-2006
Active
CJ/T 232-2006 Light gauge stainless steel pipes and insert—Pressfittings
CJ/T 235-2006
Replaced
CJ/T 235-2006 Vertical long shaft pump
CJ/T 159-2006
Replaced
CJ/T 159-2006 Polyethylene/Aluminum/ Polyethylene composite pressure pipe(butt-welded by aluminum pipe)
CJ/T 237-2006
Active
CJ/T 237-2006 Double fusion fitting for Plastic/Steel/Plastic composite pressure pipe
CJ/T 238-2006
Active