GB/T 18570.2-2001
Replaced
GB/T 11373-2017
Active
National standards
GB/T 11373-2017 Thermal spraying—Pre-treatment of surfaces of metallic parts and components
GB/T 11373-2017 Thermal spraying—Pre-treatment of surfaces of metallic parts and components
Basic Information
Standard Code:
GB/T 11373-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Pre-treatment of the surface
Publish Date:
2017-09-29
Implement Date:
2018-04-01
Pages:
8 pages
Scope
This standard specifies the process of surface pretreatment for hot-sprayed metal parts, and clarifies the important principles that should be considered during the surface pretreatment of hot-sprayed metal parts. This standard is applicable to the production of new parts, as well as the repair of old parts. For corrosion-resistant hot-sprayed zinc, aluminum, and their alloy coatings, please refer to GB/T 9793.
Development Information
Replace the following standards
Referenced Standards
ISO 11124-2
ISO 11126-7
ISO 12944-4
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 9793-1997 Metallic and other inorganic coatings—Thermal spraying—Zinc、aluminium and their alloys
GB/T 9793-2012 Thermal spraying—Metallic and other inorganic coatings—Zinc,aluminum and their alloys
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel—Comparator procedure
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface profile—Focusing microscope procedure
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profile—Stylus instrument procedure
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 5:Replica tape method for the determination of the surface profile
GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—General introduction and classification
GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 1:General introduction and classification
GB/T 18719-2002 Thermal spraying—Terminology, classification
GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—General introduction and classification
Related Standards
GB/T 18570.4-2001
Active
GB/T 18570.4-2001 Preparation of steel substrates before application of paints and related products—Tests for the assessment of surface cleanliness—Guidance on the estimation of the probability of condensation prior to paint application
GB/T 6807-2001
Active
GB/T 6807-2001 Specifications for phosphating treatment of iron and steel parts before painting
GB/T 17850.1-2002
Replaced
GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—General introduction and classification
GB/T 18838.1-2002
Active
GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—General introduction and classification
GB/T 18839.1-2002
Active