GB/T 33588.6-2020
Active
National standards
GB/T 33588.6-2020 Lightning protection system components(LPSC)—Part 6:Requirements for lightning strike counters(LSC)
GB/T 33588.6-2020 Lightning protection system components(LPSC)—Part 6:Requirements for lightning strike counters(LSC)
Price:
$ 57
Basic Information
Standard Code:
GB/T 33588.6-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrician's materials and general parts
ICS Name:
\nLightning protection
Publish Date:
2020-11-19
Implement Date:
2021-06-01
Pages:
19 pages
Scope
This part of GB/T 33588 specifies the requirements and test methods for lightning strike counters. Lightning strike counters count the lightning current passing through a conductor, such as a conductor of a lightning protection system (LPS), a conductor connected to a surge protector (SPD), or other conductors. However, the lightning strike current flowing through these conductors should not account for the majority of the total lightning strike current.
Lightning strike counters (LSCs) are also suitable for use in hazardous environments. Components installed in such conditions must take into account the necessary additional requirements.
Development Information
Same series standard
GB/T 33588.1-2020 Lightning protection system components(LPSC)—Part 1:Requirements for connection components
GB/T 33588.2-2020 Lightning protection system components (LPSC)—Part 2:Requirements for air-termination systems,down-conductors and earth electrodes
GB/T 33588.3-2020 Lightning protection system components(LPSC)—Part 3:Requirements for isolating spark gaps (ISG)
GB/T 33588.4-2020 Lightning protection system components(LPSC)—Part 4:Requirements for conductor fasteners
GB/T 33588.5-2020 Lightning protection system components(LPSC)—Part 5:Requirements for earth electrode inspection housings and earth electrode seals
GB/T 33588.7-2020 Lightning protection system components(LPSC)—Part 7:Requirements for earthing enhancing compounds
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 9789-2008 Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
IEC 60529
IEC 61000-6-4
Adopt standards
IEC 62561-6:2018
Related Standards
GB 14821.1-1993
Abolished
GB/T 19271.2-2005
Abolished
GB/T 19271.2-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 2:Shielding of structures, bonding inside structures and earthing
GB/T 19271.3-2005
Abolished
GB/T 19271.3-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 3:Requirements of surge protective devices(SPDs)
GB/T 19271.4-2005
Abolished
GB/T 19271.4-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 4:Protection of equipment in existing structures
GB/T 7327-2008
Abolished
GB/T 7327-2008 Silicon carbide surge arresters for a.c.systems
GB/T 33588.6-2016
Replaced