GB 17675-2025
Pending
National standards
force_standard
GB 17675-2025 Steering system of motor vehicles—Basic requirements
GB 17675-2025 Steering system of motor vehicles—Basic requirements
Basic Information
Standard Code:
GB 17675-2025
Standard Type:
National standards
Standard Status:
Pending
is_force_gb:
yes
CCS Name:
Steering and control systems
ICS Name:
Transmission device, suspension device
Publish Date:
2025-12-02
Implement Date:
2026-07-01
Pages:
48 pages
Scope
This document specifies the technical requirements for automotive steering systems and the requirements for identifying vehicles of the same type, and describes the corresponding test methods.
This document applies to vehicles of Classes M, N, and O as specified in GB/T 15089.
This document does not apply to:
——Pneumatic steering systems;
——Vehicles with automatic steering systems.
Note: An automatic steering system (autonomous steering system) refers to an integrated composite electronic control system that enables a vehicle to follow a predetermined or corrected path in response to the reception and transmission of external signals, without requiring the driver to exercise primary control over the vehicle.
Development Information
Replace the following standards
Referenced Standards
GB/T 3730.1-2001 Motor vehicles and trailers—Types—Terms and definitions
GB/T 3730.1-2022 Terms and definitions of motor vehicles,trailers and combination vehicle—Part 1:Types
GB/T 3730.2-1996 Road vehicle—Masses—Vocabulary and codes
GB/T 3730.3-1992 Motor vehicles and towed vehicles—Dimensions of vehicles—Terms and definitions
GB/T 5053.3-1985 Test methods and requirements of electrical connections between motor vehicles and towed vehicles
GB/T 5053.3-2006 Road vehicles—Connectors for the electrical connection of towing and towed vehicles—Definitions, tests and requirements
GB/T 5563-1994 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2006 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2025 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 7939.3-2023 Connections for hydraulic fluid power—Test methods—Part 3:Hose assemblies
GB/T 9574-2001 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to design working pressure
GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure
GB/T 12540-1990 Motor vehicles—Minimum turning diameter—Method of measurment
GB/T 12540-2009 Minimum turning circle diameter,minimum turning clearance circle diameter and out value test method for motor vehicles
GB/T 12540-2024 Minimum turning circle diameter, turning clearance circle and swing-out value test method for motor vehicles and combination of vehicles
GB 12676-1999 Road vehicle—Braking systems—Structure,performance and test methods
GB 12676-2014 Technical requirements and testing methods for commercial vehicle and trailer braking systems
GB/T 15089-2001 Classification of power-driven vehicles and trailers
GB/T 20716.1-2025 Road vehicles—Connectors for the electrical connection of towing and towed vehicles(7-pole)—Part 1:Connectors for braking systems and running gears of vehicles with 24 V nominal supply voltage
GB/T 20718-2006 Road vehicles—Connectors for the electrical connection of towing and towed vehicles—13-pole connector for vehicles with 12V nominal supply voltage
GB 21670-2008 Technical requirements and testing methods for passenger car braking systems
GB 21670-2025 Technical requirements and testing methods for passenger car braking systems
GB/T 34590.1-2017 Road vehicles—Functional safety—Part 1:Vocabulary
GB/T 34590.1-2022 Road vehicles—Functional safety—Part 1:Vocabulary
GB/T 34590.2-2017 Road vehicles—Functional safety—Part 2:Management of functional safety
GB/T 34590.2-2022 Road vehicles—Functional safety—Part 2:Management of functional safety
GB/T 34590.3-2017 Road vehicles—Functional safety—Part 3:Concept phase
GB/T 34590.3-2022 Road vehicles—Functional safety—Part 3:Concept phase
GB/T 34590.4-2017 Road vehicles—Functional safety—Part 4:Product development at the system level
GB/T 34590.4-2022 Road vehicles—Functional safety—Part 4:Product development at the system level
GB/T 34590.5-2017 Road vehicles—Functional safety—Part 5:Product development at the hardware level
GB/T 34590.5-2022 Road vehicles—Functional safety—Part 5:Product development at the hardware level
GB/T 34590.6-2017 Road vehicles—Functional safety—Part 6:Product development at the software level
GB/T 34590.6-2022 Road vehicles—Functional safety—Part 6: Product development at the software level
GB/T 34590.7-2017 Road vehicles—Functional safety—Part 7:Production and operation
GB/T 34590.7-2022 Road vehicles—Functional safety—Part 7:Production,operation,service and decommissioning
GB/T 34590.8-2017 Road vehicles—Functional safety—Part 8:Supporting processes
GB/T 34590.8-2022 Road vehicles—Functional safety—Part 8:Supporting processes
GB/T 34590.9-2017 Road vehicles—Functional safety—Part 9:Automotive Safety Integrity Level(ASIL)-oriented and safety-oriented analyses
GB/T 34590.9-2022 Road vehicles—Functional safety—Part 9:Automotive safety integrity level(ASIL)-oriented and safety-oriented analyses
GB/T 34590.10-2017 Road vehicles—Functional safety—Part 10:Guideline
GB/T 34590.10-2022 Road vehicles—Functional safety—Part 10:Guideline
GB/T 34590.11-2022 Road vehicles—Functional safety—Part 11:Guidelines on applications to semiconductors
GB/T 34590.12-2022 Road vehicles—Functional safety—Part 12:Adaptation for motorcycles
GB 34660-2017 Road vehicles—Requirements and test methods of electromagnetic compatibility
ISO 2575:2021
GB 34660-2026 Road vehicles—Requirements and test methods of electromagnetic compatibility
Related Standards
GB/T 4781-1984
Replaced
GB/T 9769-1988
Replaced
GB/T 9769-1988 Rim contour inspection
GB/T 13051-1991
Abolished
GB/T 13051-1991 Motor vehicles—Connections for PTO
GB/T 13061-1991
Replaced
GB/T 13061-1991 Air spring for automotive suspension—Rubber bellows
GB/T 13405-1992
Replaced
GB/T 13405-1992 Grooved pulleys for automotive V-belt
GB/T 13604-1992
Abolished