GB/T 15594-1995
Replaced
GB/T 35503-2017
Active
National standards
GB/T 35503-2017 Reclaimed isobutene-isoprene (IIR) rubber—Evaluation procedure
GB/T 35503-2017 Reclaimed isobutene-isoprene (IIR) rubber—Evaluation procedure
Basic Information
Standard Code:
GB/T 35503-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Recycled rubber
ICS Name:
Comprehensive raw materials for rubber and plastics
Publish Date:
2017-12-29
Implement Date:
2018-07-01
Pages:
7 pages
Scope
This standard specifies the physical and chemical test methods for evaluating recycled isobutylene-isoprene (IIR) rubber (referred to as "recycled butyl rubber"), the standard materials used to evaluate its vulcanized rubber properties, standard test formulations, equipment, and operating procedures. This standard applies to recycled rubber obtained from the rubber parts of waste automobile inner tubes, capsules, water tires, sealing strips, bottle stoppers, and other rubber products primarily composed of butyl rubber.
Development Information
Referenced Standards
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 3516-2006 Rubber—Determination of solvent extract
GB/T 4498.1-2013 Rubber—Determination of ash—Part 1:Muffle furnace method
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1232.1-2000 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity
GB/T 1232.1-2016 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity
GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 6038-1993 Rubber test mixes—Preparation, mixing and vulcanization—Equipment and procedures
GB/T 6038-2006 Rubber test mixes—Preparation,mixing and vulcanization—Equipment and procedures
GB/T 7764-2001 Rubber—Indentification-lnfra-red spectrometric method
GB/T 7764-2017 Rubber indentification—Infrared spectrometric method
GB/T 9869-1997 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter
GB/T 9869-2014 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter
GB/T 13460-2003 Reclaimed rubbers
GB/T 13460-2008 Reclaimed rubbers
GB/T 13460-2016 Reclaimed rubber—General specification
GB/T 14837.1-2014 Rubber and rubber products—Determination of the composition of vulcanizates and uncured compounds by thermogravimetry—Part 1:Butadiene,ethylene-propylene copolymer and terpolymer,isobutene-isoprene,isoprene and styrene-butadiene rubbers
GB/T 15340-1994 Rubber, raw, natural and synthetic Sampling and further preparative procedures
GB/T 15340-2008 Rubber, raw natural and raw synthetic—Sampling and further preparative procedures
GB/T 25268-2010 Rubber—Guide to the use of curemeters
GB/T 29613.1-2013 Rubber—Analysis by pyrolytic gas-chromatographic methods—Part 1:Identification of polymers(single polymers and polymer blends)
GB/T 15340-2025 Rubber,raw natural and raw synthetic—Sampling and further preparative procedures
GB/T 13460-2025 Reclaimed rubber—General specification
GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 9869.1-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 1:Introduction
GB/T 9869.2-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 2:Oscillating disc curemeter
GB/T 9869.3-2025 Rubber—Measurement of vulcanization characteristics usingcuremeters—Part 3:Rotorless curemeter
Adopt standards
ISO/TS 16096:2014
Related Standards
GB/T 1844.1-1995
Replaced
GB/T 1844.1-1995 Symbols of plastics and resins—Part 1:Basic polymers and their special characteristics
GB/T 1844.2-1995
Replaced
GB/T 1844.2-1995 Symbols of plastics and resins—Part 2:Fillers and reinforcing materials
GB/T 1844.3-1995
Replaced
GB/T 1844.3-1995 Symbols of plastics and resins—Part 3:Plasticizers
GB/T 9865.1-1996
Replaced
GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic—Preparation of samples and test pieces—Part1:Physical tests
GB/T 2918-1998
Replaced