GA 834-2009 Active Industry standards-Public safety

GA 834-2009 Foam-spray extinguishing equipments

GA 834-2009 Foam-spray extinguishing equipments

Publish Date: 2009-06-04 Implement Date: 2009-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GA 834-2009

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Fire-fighting equipment and materials

ICS Name: Fire prevention

Publish Date: 2009-06-04

Implement Date: 2009-07-01

Pages: 23 pages

Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage requirements for foam spray fire-extinguishing devices (hereinafter referred to as "devices") and their components.
This standard applies to foam spray fire-extinguishing devices in foam fire-extinguishing systems.

Development Information

Word Count: 40 Thousand words Pages: 23 pages

Referenced Standards

GB 5135.3-2003 Automatic sprinkler system—Part 3:Water mist nozzles GB 5135.10-2006 Automatic sprinkler system—Part 10:Pressure switch GB 15308-2006 Foam extinguishing agent GB 150-1998 Steel pressure vessels GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts GB/T 3098.3-2000 Mechanical properties of fasteners—Setscrews GB/T 3098.3-2016 Mechanical properties of fasteners—Set screws GB 5135.11-2006 Automatic sprinkler system—Part 11:Grooved couplings and fittings GB/T 9112-2000 Types and parameters for steel pipe flanges GB/T 9112-2010 Types and parameters for steel pipe flanges GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB/T 17241.6-1998 Integral cast iron pipe flanges GB/T 17241.6-2008 Integral cast iron flanges GA 61-2002 Fixed Fire Extinguishing System Drive and Control Device General Technical Specification GA 400-2002 Performance requirements and method of test for components of gas fire extinguishing systems GB 50151-2021 Code for installation and acceptance of foam extinguishing systems GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts GB 5135.11-2025 Automatic sprinkler systems—Part 11:Grooved pipe couplings and fittings GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets

Related Standards

GB 4400-1984 Replaced

GB 4400-1984 Portable chemical foam fire extinguishers

Publish Date: 1984-05-16

GB 4453-1984 Replaced

GB 4453-1984 Hydrant connector

Publish Date: 1984-06-03

GB 5908-1986 Replaced

GB 5908-1986 The quenching ability of flame arresters and its test method for petroleum tanks

Publish Date: 1986-03-03

GB 12791-1991 Replaced

GB 12791-1991 Performance requirements and test methods for point ultraviolet flame detectors

Publish Date: 1991-04-11

GB 12955-1991 Replaced

GB 12955-1991 General technical conditions for steel fire door

Publish Date: 1991-06-04

GB 13347-1992 Replaced

GB 13347-1992 The quenching ability of flame arrester and its test method for petroleum gas piping systems

Publish Date: 1992-01-05