GB/T 14293-1998
Active
GB/T 8013.2-2007
Replaced
National standards
GB/T 8013.2-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2:Combined anodic oxide coating
GB/T 8013.2-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2:Combined anodic oxide coating
Basic Information
Standard Code:
GB/T 8013.2-2007
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Non-ferrous metals and their alloy products
ICS Name:
Surface treatment and plating coating combined
Publish Date:
2007-04-30
Implement Date:
2007-11-01
Pages:
11 pages
Scope
This part specifies the terms, definitions, classification, and performance requirements of the effective surface of anodized composite films of aluminum and aluminum alloys, as well as the test methods and inspection rules. This part applies to anodized composite films obtained by coating the surface of deformed aluminum and aluminum alloy anodized films with organic polymer films, primarily for protection and decoration purposes.
Development Information
Same series standard
Superseded by the following standards
Referenced Standards
GB/T 629-1997 Chemical reagent—Sodium hydroxide
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 1865-1997 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Filtered xenon-arc radiation
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6462-1986 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 8013.1-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1:Anodic oxide coatings
GB/T 8013.1-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1:Anodic oxide coatings
GB/T 8014.1-2005 Anodizing of aluminium and its alloys—The measuring method of thickness of anodic oxide coatings—Part 1:The measuring principle
GB/T 9276-1996 Methods of exposure to natural weathering of coating
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 9761-2008 Paints and varnishes—Visual comparison of the colour of paints
GB/T 9789-1988 Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
GB/T 9789-2008 Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 11186.2-1989 Methods for measuring the color of paint films—Part 2:Colour measurement
GB/T 11186.3-1989 Methods for measuring the color of paint films—Part 3:Calculation of color differences
GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys—Measurmeent of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus
GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys—Part 1:Measurement of abrasion resistance
GB/T 14952.3-1994 Anodizing of aluminium and its alloys—Determination of color differences and appearance of colored anodic oxide films—Viewing method
GB/T 16585-1996 Rubber, vulcanized—Test method of resistance to artificial weathering (Fluorescent UV lamp)
JC/T 480-1992 JC/T 480-1992 building raw lime powder
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method
GB/T 6462-2025 Metallic and oxide coatings—Measurement of coating thinckness—Microscopical method
GB/T 629-2026 Chemical reagent—Sodium hydroxide
Related Standards
GB/T 18178-2000
Active
GB/T 18178-2000 General rules of the selection for painting system of water paint
GB/T 18179-2000
Active
GB/T 18179-2000 Metallic coatings—Porosity tests—Humid sulfur(flowers of sulfur) test
GB/T 12334-2001
Active
GB/T 12334-2001 Metallic and other inorganic coatings—Definitions and conventions concerning the measurement of thickness
GB/T 18719-2002
Active
GB/T 18719-2002 Thermal spraying—Terminology, classification
GB/T 11377-2005
Active