GB/T 25119-2021 Active National standards

GB/T 25119-2021 Railway applications—Electronic equipment used on rolling stock

GB/T 25119-2021 Railway applications—Electronic equipment used on rolling stock

Publish Date: 2021-12-31 Implement Date: 2022-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 113

Basic Information

Standard Code: GB/T 25119-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Traction electrical equipment

ICS Name: Electric traction equipment

Publish Date: 2021-12-31

Implement Date: 2022-07-01

Pages: 39 pages

Scope

This document specifies the requirements for the use, design, manufacture, and testing of electronic devices installed on rail transit locomotives and vehicles, as well as the basic software and hardware requirements for their durability and reliability. If appropriate, additional requirements in other standards or specifications may be used as supplementary requirements to this document. The terms of agreement that may be negotiated between the parties are described in Appendix A. This document applies to all control, regulation, protection, diagnostic, and power supply electronic devices installed on rail transit locomotives and vehicles, which can be powered by onboard batteries or generators, or by low-voltage power sources (transformers, voltage dividers, auxiliary power supplies) directly or indirectly connected to the overhead contact network. In practical applications, the special requirements necessary to ensure the functional safety level are determined by GB/T 21562-2008, clauses 4.6.3.1, 4.6.3.2, and Appendix A. When residual risks still exist and the function needs to be performed by a software-driven programmable electronic system, consider a software safety integrity level of 1 or higher, as specified in GB/T 28808-2021. In this document, "electronic devices" (hereinafter referred to as "devices") refer to devices primarily composed of semiconductor devices and other general components, which are typically mounted on printed circuit boards. Note: This document also applies to sensors (such as current, voltage, speed, etc.) and trigger boards for power electronic devices. For complete trigger devices, refer to GB/T 25122.1.

Development Information

Word Count: 77 Thousand words Pages: 39 pages

Replace the following standards

GB/T 25119-2010 Railway applications—Electronic equipments used on rail vehicles

Referenced Standards

GB 1402-1998 A.C.Voltage of electric traction for the railway main lines GB/T 1402-2010 Railway applications—Supply voltages of traction systems GB/T 1402-2025 Railway applications—Supply voltages of traction systems GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 4728.1-2005 Graphical symbols for electrical diagrams—Part 1:General information GB/T 4728.1-2018 Graphical symbols for electrical diagrams—Part 1:General information GB/T 4728.2-1998 Graphical symbols for diagrams—Part 2 Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.2-2005 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.2-2018 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.3-1998 Graphical symbols for diagrams—Part 3 Conductors and connecting devices GB/T 4728.3-2005 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices GB/T 4728.3-2018 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices GB/T 4728.4-1999 Graphical symbols for diagrams—Part 4:Basic passive components GB/T 4728.4-2005 Graphical symbols for electrical diagrams—Part 4:Basic passive components GB/T 4728.4-2018 Graphical symbols for electrical diagrams—Part 4:Basic passive components GB/T 4728.5-2000 Graphical symbols for diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.5-2005 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.5-2018 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.6-2000 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.6-2008 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.6-2022 Graphical symbols for electrical diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.7-2000 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.7-2008 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.7-2022 Graphical symbols for electrical diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.8-2000 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signalling devices GB/T 4728.8-2008 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signaling devices GB/T 4728.8-2022 Graphical symbols for electrical diagrams—Part 8:Measuring instruments,lamps and signalling devices GB/T 4728.9-1999 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.9-2008 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.9-2022 Graphical symbols for electrical diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.10-1999 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission GB/T 4728.10-2008 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission GB/T 4728.10-2022 Graphical symbols for electrical diagrams—Part 10:Telecommunications:Transmission GB/T 4728.11-2000 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams GB/T 4728.11-2008 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams GB/T 4728.11-2022 Graphical symbols for electrical diagrams—Part 11:Architectural and topographical GB/T 4728.12-1996 Graphical symbols for electrical diagrams—Part 12:Binary logic elements GB/T 4728.12-2008 Graphical symbols for diagrams—Part 12:Binary logic elements GB/T 4728.12-2022 Graphical symbols for electrical diagrams—Part 12:Binary logic elements GB/T 4728.13-1996 Graphical symbols for electrical diagrams Part 13:Analogue elements GB/T 4728.13-2008 Graphical symbols for diagrams—Part 13:Analogue elements GB/T 4728.13-2022 Graphical symbols for electrical diagrams—Part 13:Analogue elements GB/T 5080.1-1986 Equipment reliability testing—General requirements GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles GB/T 5080.2-1986 Equipment reliability testing—Guidance for the design of test cycles GB/T 5080.2-2012 Reliability testing—Part 2:Design of test cycles GB/T 5080.4-1985 Equipment reliability testing—Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution) GB/T 5080.5-1985 Equipment reliability testing—compliance test plans for success ratio GB/T 5080.6-1996 Equipment reliability testing—Tests for the validity of a constant failure rate assumption GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate GB/T 6988.1-1997 Preparation of documents used in electrotechnology—Part 1:General requirements GB/T 6988.1-2008 Preparation of documents used in electrotechnology—Part 1:Rules GB/T 6988.1-2024 Preparation of documents used in electrotechnology—Part1:Rules GB/T 18290.2-2000 Solderless connections—Part 2:Solderless crimped connections—General requirements, test methods and practical guidance GB/T 18290.2-2015 Solderless connections—Part 2:Crimped connections—General requirements,test methods and practical guidance GB/T 19001-2000 Quality management systems—Requirements GB/T 19001-2008 Quality management systems—Requirements GB/T 19001-2016 Quality management systems—Requirements GB/T 19520.12-2009 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-101:Subracks and associated plug-in units GB/T 21413.1-2008 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules GB/T 21562-2008 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS) GB/T 21563-2008 Railway applications—Rolling stock equipment—Shock and vibration tests GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests GB/T 24338.4-2018 Railway applications—Electromagnetic compatibility—Part 3-2:Rolling stock—Apparatus GB/T 32347.1-2015 Railway applications—Environmental conditions for equipment—Part 1:Equipment on board rolling stock TB/T 3213-2009 Highland locomotive vehicle electrical and electronic equipment general technical specification ISO 90003 IEC 60352-1 IEC 61188(所有部分) IEC 61249-2-7 IEC 61249-2-22 IEC 62326(所有部分)

Adopt standards

IEC 60571:2012

Related Standards

GB/T 3317-1982 Replaced

GB/T 3317-1982 General technical specifications for electric locomotives

Publish Date: 1982-12-24

GB/T 3318-1982 Replaced

GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction

Publish Date: 1982-12-24

GB/T 6927-1986 Abolished

GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems

Publish Date: 1986-09-23

GB 1402-1998 Replaced

GB 1402-1998 A.C.Voltage of electric traction for the railway main lines

Publish Date: 1998-12-17

GB/T 3319-1998 Replaced

GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units

Publish Date: 1998-12-17

GB 5914.1-2000 Replaced

GB 5914.1-2000 Visibility conditions for driver's cabs of locomotives

Publish Date: 2000-01-03