GB/T 25119-2010 Replaced National standards

GB/T 25119-2010 Railway applications—Electronic equipments used on rail vehicles

GB/T 25119-2010 Railway applications—Electronic equipments used on rail vehicles

Publish Date: 2010-09-02 Implement Date: 2011-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25119-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Traction electrical equipment

ICS Name: Electric traction equipment

Publish Date: 2010-09-02

Implement Date: 2011-02-01

Pages: 34 pages

Scope

This standard specifies the requirements for the use, design, manufacture, and testing of electronic devices, as well as the basic software and hardware requirements necessary for their durability and reliability. If appropriate, additional requirements in other standards or specifications can be used as supplementary requirements of this standard. The terms of this standard that can be agreed upon by both parties are described in Appendix B.
This standard applies to all electronic devices installed on rail transit vehicles (including metros and urban rail vehicles) for control, regulation, protection, and power supply. These devices may be powered by on-board batteries or generators, or by low-voltage power sources (transformers, voltage dividers, auxiliary power supplies) directly or indirectly connected to the overhead contact network. In this standard, electronic devices refer to devices mainly composed of semiconductor devices and other general components, which are typically mounted on printed circuit boards.
Note: This standard also applies to sensors (for current, voltage, speed, etc.) and trigger boards for power electronic devices, but complete trigger devices should comply with GB/T 25122.1.
This standard does not apply to power electronic devices for main circuits and auxiliary circuits.

Development Information

Word Count: 67 Thousand words Pages: 34 pages

Superseded by the following standards

GB/T 25119-2021 Railway applications—Electronic equipment used on rolling stock

Referenced Standards

GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4588.1-1996 Sectional specification:single and double sided printed boards with plain holes GB/T 4588.2-1996 Sectional specification:single and double sided printed boards with plated-through holes GB/T 4588.3-2002 Design and use of printed boards GB/T 4728.1-2005 Graphical symbols for electrical diagrams—Part 1:General information GB/T 4728.1-2018 Graphical symbols for electrical diagrams—Part 1:General information GB/T 4728.2-1998 Graphical symbols for diagrams—Part 2 Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.2-2005 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.2-2018 Graphical symbols for electrical diagrams—Part 2:Symbol elements,qualifying symbols and other symbols having general application GB/T 4728.3-1998 Graphical symbols for diagrams—Part 3 Conductors and connecting devices GB/T 4728.3-2005 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices GB/T 4728.3-2018 Graphical symbols for electrical diagrams—Part 3:Conductors and connecting devices GB/T 4728.4-1999 Graphical symbols for diagrams—Part 4:Basic passive components GB/T 4728.4-2005 Graphical symbols for electrical diagrams—Part 4:Basic passive components GB/T 4728.4-2018 Graphical symbols for electrical diagrams—Part 4:Basic passive components GB/T 4728.5-2000 Graphical symbols for diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.5-2005 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.5-2018 Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes GB/T 4728.6-2000 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.6-2008 Graphical symbols for diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.6-2022 Graphical symbols for electrical diagrams—Part 6:Production and conversion of electrical energy GB/T 4728.7-2000 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.7-2008 Graphical symbols for diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.7-2022 Graphical symbols for electrical diagrams—Part 7:Switchgear,controlgear and protective devices GB/T 4728.8-2000 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signalling devices GB/T 4728.8-2008 Graphical symbols for diagrams—Part 8:Measuring instruments,lamps and signaling devices GB/T 4728.8-2022 Graphical symbols for electrical diagrams—Part 8:Measuring instruments,lamps and signalling devices GB/T 4728.9-1999 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.9-2008 Graphical symbols for diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.9-2022 Graphical symbols for electrical diagrams—Part 9:Telecommunications:Switching and peripheral equipment GB/T 4728.10-1999 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission GB/T 4728.10-2008 Graphical symbols for diagrams—Part 10:Telecommunications:Transmission GB/T 4728.10-2022 Graphical symbols for electrical diagrams—Part 10:Telecommunications:Transmission GB/T 4728.11-2000 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams GB/T 4728.11-2008 Graphical symbols for diagrams—Part 11:Architectural and topographical installation plans and diagrams GB/T 4728.11-2022 Graphical symbols for electrical diagrams—Part 11:Architectural and topographical GB/T 4728.12-1996 Graphical symbols for electrical diagrams—Part 12:Binary logic elements GB/T 4728.12-2008 Graphical symbols for diagrams—Part 12:Binary logic elements GB/T 4728.12-2022 Graphical symbols for electrical diagrams—Part 12:Binary logic elements GB/T 4728.13-1996 Graphical symbols for electrical diagrams Part 13:Analogue elements GB/T 4728.13-2008 Graphical symbols for diagrams—Part 13:Analogue elements GB/T 4728.13-2022 Graphical symbols for electrical diagrams—Part 13:Analogue elements GB/T 5080.1-1986 Equipment reliability testing—General requirements GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles GB/T 5080.2-1986 Equipment reliability testing—Guidance for the design of test cycles GB/T 5080.2-2012 Reliability testing—Part 2:Design of test cycles GB/T 5080.4-1985 Equipment reliability testing—Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution) GB/T 5080.5-1985 Equipment reliability testing—compliance test plans for success ratio GB/T 5080.6-1996 Equipment reliability testing—Tests for the validity of a constant failure rate assumption GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate GB/T 6988.1-1997 Preparation of documents used in electrotechnology—Part 1:General requirements GB/T 6988.1-2008 Preparation of documents used in electrotechnology—Part 1:Rules GB/T 6988.1-2024 Preparation of documents used in electrotechnology—Part1:Rules GB 9254-1998 Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement GB/T 9254-2008 Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement GB/T 9254.1-2021 Information technology equipment,multimedia equipment and receivers—Electromagnetic compatibility—Part 1:Emission requirements GB/T 9254.2-2021 Information technology equipment,multimedia equipment and receivers—Electromagnetic compatibility—Part 2:Immunity requirements GB/T 12629-1990 Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards GB/T 13555-1992 Flexible copper-clad polyimide film for printed circuits GB/T 13555-2017 Copper-clad polyimide film laminates for flexible printed circuits GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 18290.2-2000 Solderless connections—Part 2:Solderless crimped connections—General requirements, test methods and practical guidance GB/T 18290.2-2015 Solderless connections—Part 2:Crimped connections—General requirements,test methods and practical guidance GB/T 19001-2000 Quality management systems—Requirements GB/T 19001-2008 Quality management systems—Requirements GB/T 19001-2016 Quality management systems—Requirements GB/T 19520.12-2009 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-101:Subracks and associated plug-in units GB/T 21562-2008 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS) GB/T 21563-2008 Railway applications—Rolling stock equipment—Shock and vibration tests GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests IEC 60321:1970 IEC 60352-1:1997 IEC 60850:2007 IEC 61188-5(所有部分) IEC 61249(所有部分) IEC 62279:2002

Adopt standards

IEC 60571:2006

Related Standards

GB/T 3317-1982 Replaced

GB/T 3317-1982 General technical specifications for electric locomotives

Publish Date: 1982-12-24

GB/T 3318-1982 Replaced

GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction

Publish Date: 1982-12-24

GB/T 6927-1986 Abolished

GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems

Publish Date: 1986-09-23

GB 1402-1998 Replaced

GB 1402-1998 A.C.Voltage of electric traction for the railway main lines

Publish Date: 1998-12-17

GB/T 3319-1998 Replaced

GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units

Publish Date: 1998-12-17

GB 5914.1-2000 Replaced

GB 5914.1-2000 Visibility conditions for driver's cabs of locomotives

Publish Date: 2000-01-03