GB/T 3148-1982
Replaced
GB/T 13505-2025
Active
National standards
GB/T 13505-2025 Pure insulating pulp
GB/T 13505-2025 Pure insulating pulp
Price:
$ 33.00
Basic Information
Standard Code:
GB/T 13505-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paper pulp and cardboard
ICS Name:
\nPulp
Publish Date:
2025-12-02
Implement Date:
2026-07-01
Pages:
12 pages
Scope
This document specifies the requirements for high-purity insulating wood pulp, testing rules, marking, packaging, transportation, and storage. It describes the corresponding test methods and provides information on classification. This document is applicable to the production, testing, and sales of high-purity insulating wood pulp.
Development Information
Replace the following standards
Referenced Standards
GB/T 451.1-2002 Paper and board—Determination of size and deviation
GB/T 462-2003 Paper and board—Determination of moisture content
GB/T 462-2008 Paper,board and pulp—Determination of moisture content of analytical sample
GB/T 462-2023 Paper, board and pulps—Determination of moisture content of analytical sample
GB/T 740-2003 Pulps—Sampling for testing
GB/T 742-2003 Paper,board and pulp—Determination of residue(ash) on ignition at 900℃
GB/T 742-2008 Fibrous raw material,pulp,paper and board—Determination of ash
GB/T 742-2018 Fibrous raw material,pulp,paper and board—Determination of residue(ash)on ignition at 575 ℃ and 900 ℃
GB/T 1545-2008 Paper,board and pulp—Determination of acidity or alkalinity
GB/T 1546-2004 Pulps-Determination of Kappa number
GB/T 1546-2018 Pulp—Determination of Kappa number
GB/T 1548-2004 Pulps-Determination of viscosity
GB/T 1548-2016 Pulps—Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
GB/T 2678.2-2021 Paper,board and pulps—Determination of water-soluble chlorides
GB/T 2678.6-2023 Paper,board and pulp—Determination of water-soluble sulfates
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 3332-2004 Pulps-Determination of beating degree(Schopper-Riegler method)
GB/T 7974-2002 Paper, board and pulp-Measurement of brightness—Diff/Geometry
GB/T 7974-2013 Paper,board and pulps—Measurement of diffuse blue reflectance factor—D65 brightness(Diff/ Geometry,Outdoor daylight conditions)
GB/T 7977-2007 Paper, board and pulps—Determination of conductivity of aqueous extracts
GB/T 8940.2-2002 Pulp—Preparation of laboratory sheets for the measurement of brightness
GB/T 10740-2002 Pulp—Estimation of dirt and shives
GB/T 22902-2008 Pulps—Determination of acetone-soluble matter
GB/T 22902-2025 Pulps—Determination of acetone-soluble matter
GB/T 24323-2009 Pulps—Laboratory sheets—Determination of physical properties
GB/T 24324-2009 Pulps—Preparation of laboratory sheets for physical testing—Conventional sheet-former method
GB/T 24325-2009 Pulps—Laboratory beating—Valley beater method
GB/T 24326-2009 Pulps—Preparation of laboratory sheets for physical testing—Rapid-K●then method
GB/T 29287-2012 Pulps—Laboratory beating—PFI mill method
GB/T 40272-2021 Paper,board,pulps and cellulose nanomaterials—Determination of acid-soluble magnesium,calcium,manganese,iron,copper,sodium and potassium
Related Standards
GB/T 12659-1990
Replaced
GB/T 12659-1990 Pulps—Laboratory beating—Jokro mill method
GB/T 12660-1990
Replaced
GB/T 12660-1990 Pulps—Determination of drainability—"Canadian standard " freeness method
GB/T 13505-1992
Replaced
GB/T 13505-1992 Pure insulating pulp
GB/T 13506-1992
Replaced
GB/T 13506-1992 Bleached sulfite pulp
GB/T 13507-1992
Active