GB/T 13320-2007
Replaced
GB/T 22131-2022
Active
National standards
GB/T 22131-2022 Practice for ultrasonic examination from bored surfaces of cylindrical forgings
GB/T 22131-2022 Practice for ultrasonic examination from bored surfaces of cylindrical forgings
Price:
$ 42
Basic Information
Standard Code:
GB/T 22131-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Forging and pressing
ICS Name:
\nSteel forgings
Publish Date:
2022-10-12
Implement Date:
2022-10-12
Pages:
7 pages
Scope
This document describes the basic method of ultrasonic testing using longitudinal wave dual crystal probes from the inner surface of forgings by the pulse reflection method, including the requirements for testing personnel, general requirements, ultrasonic testing equipment, preparation of forgings for ultrasonic testing, testing procedures, recording requirements, and testing reports. This document is applicable to manual testing of cylindrical forgings with an inner diameter of ≥64 mm, but it does not limit the use of other testing methods, such as mechanized or automated testing methods.
Development Information
Replace the following standards
Referenced Standards
GB/T 8541-1997 Terminology of forging and stamping
GB/T 8541-2012 Terminology of forging and stamping
GB/T 9445-1999 Qualification and certification for nondestructive testing personnel
GB/T 9445-2005 Non-destructive testing—Qualification and certification of personnel
GB/T 9445-2008 Non-destructive testing—Qualification and certification of personnel
GB/T 9445-2015 Non-destructive testing—Qualification and certification of NDT personnel
GB/T 12604.1-2005 Non-destructive testing—Terminology—Terms used in ultrasonic testing
GB/T 12604.1-2020 Non-destructive testing—Terminology—Ultrasonic testing
GB/T 27664.1-2011 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
GB/T 27664.3-2012 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 3:Combined equipment
GB/T 9445-2024 Non-destructive testing—Qualification and certification of personnels
GB/T 27664.1-2026 Non-destructive testing instruments—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
GB/T 27664.3-2026 Non-destructive testing instruments—Characterization and verification of ultrasonic test equipment—Part 3:Combined equipment
Related Standards
GB/T 20911-2007
Active
GB/T 20911-2007 Semi finished products for forging—Tolerances on dimensions shape and mass
GB/T 21469-2008
Active
GB/T 21469-2008 Machining allowances and tolerances for steel open die forgings on hammer—General requirement
GB/T 21470-2008
Active
GB/T 21470-2008 Machining allowances and tolerances for steel open die forgings on hammer—Disks,columns,rings and seamless cylindrical sleeves
GB/T 21471-2008
Active
GB/T 21471-2008 Machining allowances and tolerances for steel open die forgings on hammer—Shafts
GB/T 22131-2008
Replaced