DZ/T 0101.12-1994
Active
T/CAPEB 00001.7-2022
Active
Group standards
T/CAPEB 00001.7-2022 Pharmaceutical equipment, containers and pipes - Part 7: Inspection
T/CAPEB 00001.7-2022 Pharmaceutical equipment, containers and pipes - Part 7: Inspection
Price:
$ 20.00
Basic Information
Standard Code:
T/CAPEB 00001.7-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Pharmaceuticals, safety machinery, and equipment
ICS Name:
-
Publish Date:
2022-11-08
Implement Date:
2023-05-07
Pages:
12 pages
Scope
This document specifies the requirements, inspection conditions, and inspection methods for the cleaning, disinfection, sterilization, and inspection of containers and pipelines in pharmaceutical equipment that come into contact with products or process media. This document applies to the factory inspection of containers and pipelines (hereinafter referred to as containers and pipelines) that require cleaning, disinfection, sterilization, and contact with products or process media, as well as the inspection conducted by users or third-party inspection agencies for compliance verification.
Development Information
Same series standard
T/CAPEB 00001.1-2022 Pharmaceutical equipment - Containers and pipelines - Part 1: General requirements
T/CAPEB 00001.2-2022 Pharmaceutical equipment containers and piping - Part 2: Materials
T/CAPEB 00001.3-2022 Pharmaceutical equipment—Vessel and pipe—Part 3:Design
T/CAPEB 00001.4-2022 Pharmaceutical equipment - Containers and pipelines - Part 4: Fittings
T/CAPEB 00001.5-2022 Pharmaceutical equipment - Containers and Pipelines - Part 5: Pipe connections
T/CAPEB 00001.6-2022 Pharmaceutical equipment containers and piping - Part 6: Manufacture and installation
T/CAPEB 00001.8-2022 Pharmaceutical equipment—Vessel and pipe—Part 8:Validation
Referenced Standards
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB 151-1999 Tubular heat exchangers
GB/T 151-2014 Heat exchangers
GB/T 8174-1987 Methods of measuring and evaluating thermal insulation effects for equipments and pipes
GB/T 8174-2008 Method of measuring and evaluation thermal insulation effects for equipments and pipes
GB/T 8196-2003 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards
GB/T 8196-2018 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards
GB/T 20801.1-2006 Pressure piping code—Industrial piping—Part 1:General
GB/T 20801.1-2020 Pressure piping code—Industrial piping—Part 1:General
GB/T 20801.2-2006 Pressure piping code—Industrial piping—Part 2:Materials
GB/T 20801.2-2020 Pressure piping code—Industrial piping—Part 2:Materials
GB/T 20801.3-2006 Pressure piping code—Industrial piping—Part 3:Design and calculation
GB/T 20801.3-2020 Pressure piping code—Industrial piping—Part 3:Design and calculation
GB/T 20801.4-2006 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly
GB/T 20801.4-2020 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly
GB/T 20801.5-2006 Pressure piping code—Industrial piping—Part 5:Inspection and testing
GB/T 20801.5-2020 Pressure piping code—Industrial piping—Part 5:Inspection and testing
GB/T 20801.6-2006 Pressure piping code—Industrial piping—Part 6:Safeguarding
GB/T 20801.6-2020 Pressure piping code—Industrial piping—Part 6:Safeguarding
GB/T 25150-2010 Quality test method of passive film on austenitic stainless steel of chemical cleaning for industrial equipment—Blue dot method
GB/T 36030-2018 General technical requirements of CIP and SIP for pharmaceutical machinery
NB/T 47003.1
NB/T 47013.1-2015 Non-destructive testing of pressure equipment - Part 1: General requirements
NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing
NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing"
NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing
NB/T 47013.6-2015 Non-destructive testing of pressure equipment - Part 6: Eddy current testing
T/CAPEB 00001.1
中华人民共和国药典(2020年版)
GB 50184-2011 Code for acceptance of construction quality of industrial metallic piping
GB/T 8174-2025 Method of measuring and evaluation thermal insulation effects for equipments and pipes
GB/T 20801.1-2025 Pressure piping code—Part 1:Industrial piping
GB/T 20801.5-2025 Pressure piping code—Part 5:Hydrogen piping and pipelines
GB/T 151-2026 Heat exchangers
GB/Z 151-2026 Fire prevention measures on converters for high-voltage direct current(HVDC)systems,static var compensators(SVC)and flexible AC transmission systems(FACTS)and their valve halls
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
\nDZ 4-1981 Method for Compiling Product Models of Geological Instrumentation Equipment
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active