GB/T 16762-1997
Replaced
GB/T 3082-2020
Active
National standards
GB/T 3082-2020 Galvanized or zinc-aluminum alloy-coated low-carbon steel wire for armoured cables
GB/T 3082-2020 Galvanized or zinc-aluminum alloy-coated low-carbon steel wire for armoured cables
Price:
$ 50
Basic Information
Standard Code:
GB/T 3082-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wire, steel wire rope
ICS Name:
Wire, steel wire rope, and link chains
Publish Date:
2020-09-29
Implement Date:
2021-04-01
Pages:
10 pages
Scope
This standard specifies the classification and marking of hot-dip galvanized and hot-dip galvanized with 5% aluminum or 10% aluminum alloy coating low-carbon steel wires (hereinafter referred to as steel wires) used in armored cables, as well as the ordering content, technical requirements, test methods, inspection rules, packaging, marking, and quality certificates. This standard applies to hot-dip galvanized low-carbon steel wires used in armored cables for preventing damage to submarine and underground cables used in communication, automatic control, or power transmission, or to steel wires with hot-dip galvanized with 5% aluminum or 10% aluminum alloy coating used to improve the corrosion resistance of the coating.
Development Information
Replace the following standards
Referenced Standards
GB/T 470-2008 Zinc ingots
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 701-1997 Hot-rolled low carbon steel wire rods
GB/T 701-2008 Hot rolled low carbon steel wire rods
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2103-1988 General provisions for checking, packing, marking and quality certification of steel wire
GB/T 2103-2008 General requirements for acceptance,packing,marking and quality certification of steel wire
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 24242.2-2009 Non-alloy steel wire rods for conversion to wire—Part 2:Specific requirements for general purpose wire rod
GB/T 24242.2-2020 Non-alloy steel wire rod for conversion to wire—Part 2:Specific requirements for general purpose wire rod
YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
YS/T 310-1995 Zinc alloy for hot dip galvanizing
YS/T 310-2008 Zinc alloy ingot for hot dip galvanizing
YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values
YS/T 310-2021 Galvanized Zinc Alloy Ingots for Hot Dipping
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
Related Standards
GB/T 342-1997
Replaced
GB/T 342-1997 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
MT 244.1-1997
Replaced
MT 244.1-1997 Car coupler of decauville for mine connecting chain
MT 244.2-1997
Replaced
MT 244.2-1997 Car coupler of decauville for mine—Connecting bolt
MT 716-1997
Replaced
MT 716-1997 Delivery requirements of wire ropes for mine hoisting
MT 717-1997
Active