GB/T 45932-2025 Active National standards

GB/T 45932-2025 Common specifications for high-voltage direct current switchgear and controlgear standards

GB/T 45932-2025 Common specifications for high-voltage direct current switchgear and controlgear standards

Publish Date: 2025-06-30 Implement Date: 2026-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 173.00
Download

Basic Information

Standard Code: GB/T 45932-2025
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: High-voltage switchgear
ICS Name: High-voltage switchgear and controllers
Publish Date: 2025-06-30
Implement Date: 2026-01-01
Pages: 120 pages

Scope

This document defines the terms and definitions of high-voltage DC switching and control equipment, stipulates the requirements for operating conditions, rated values, design, and structure, and describes the corresponding test methods. This document is applicable to DC switching and control equipment designed to operate on high-voltage DC systems with a DC voltage of 1.5 kV or higher, whether installed indoors or outdoors. Unless otherwise specified in the relevant product standards for specific types of switching and control equipment, this document applies to all high-voltage DC switching and control equipment.

Development Information

Word Count: 202 Thousand words Pages: 120 pages

Referenced Standards

GB/T 4798.3-1990 Environmental conditions existing in the application for electric and electronic products—Stationary use at weather-protected locations GB/T 4798.3-2007 Environmental conditions existing in the application of electric and electronic products—Part 3:Stationary use at weather-protected locations GB/T 4798.3-2023 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 3:Stationary use at weatherprotected locations GB/T 4798.4-1990 Environmental conditions existing in the application for electric and electronic products—Stationary use at non-weather-protected locations GB/T 4798.4-2007 Environmental conditions existing in the application of electric and electronic products—Part 4:Stationary use at non-weather-protected locations GB/T 4798.4-2023 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 4:Stationary use at non-weatherprotected locations GB/T 4798.5-1987 Enviromental conditions existing in the application of electric and electronic products—Ground vehicle installations GB/T 4798.5-2007 Environmental conditions existing in the application of electric and electronic products—Section 5:Ground vehicle installations GB/T 4798.6-1996 Environmental conditions existing in the application of electric and electronic products—Ship environment GB/T 4798.6-2012 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Ship environment GB/T 4798.7-1987 Environmental conditions existing in the application of electric and electronic products—Portable and non-statonary use GB/T 4798.7-2007 Environmental conditions existing in the application of electric and electronic products—Part 7:Portable and non-stationary use GB/T 4798.9-1997 Environmental conditions existing in application of electric and electronic products—Microclimates inside products GB/T 4798.9-2012 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Microclimates inside products GB/T 4798.10-1991 Environmental conditions existing in the application of electric and electronic products—Introduction GB/T 4798.10-2006 Environmental conditions existing in the application of electric and electronic products—Guidance GB/T 4798.11-2024 Classification of environmental conditions—Classification of groups of environ-mental parameters and their severities—Part 11:Drawing the distribution map of environmental severities GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement GB 4824-2013 Industrial,scientific and medical(ISM) radio-frequency equipment—Disturbance characteristics—Limits and methods of measurement GB 4824-2019 Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB 4824-2025 Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB/T 5095.2-1997 Electromechanical components for electronic equipment Basic testing procedures and measuring methods—Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests GB/T 5465.2-1996 Graphical symbols for use on electrical equipment GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 7354-2003 Partial discharge measurements GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements GB/T 8905-1996 The guide for processing and measuring SF6 gas in power apparatus GB/T 8905-2012 The guide for management and measuring SF6 gas in electrical equipment GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards GB/T 11287-2000 Electrical relays—Part 21:Vibration,shock,bump and seismic tests on measuring relays and protection equipment—Section one:Vibration tests(sinusoidal) GB/T 11604-2015 Testing procedure of radio interference generated by high voltage equipment GB 12022-1989 Sulphur hexafluoride for industrial use GB/T 12022-2006 Sulphur hexafluoride for industrial use GB/T 12022-2014 Industrial sulfur hexafluoride GB/T 12022-2025 Industrial sulphur hexafluoride GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17626.17-2005 Electromagnetic Compatibility—Testing and measurement techniques—Ripple on d.c.input power port immunity test GB/T 17626.18-2016 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory wave immunity test GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment GB/T 17627.1-1998 High-voltage test techniques for low-voltage equipment—Part 1:Definitions,test and procedure requirements GB/T 17627.2-1998 High-voltage test techniques for low-voltage equipment—Part 2:Measuring system and test equipment GB/T 17799.2-2003 Electromagnetic compatibility—Generic standards—Immunity for industrial environments GB/T 17799.2-2023 Electromagnetic compatibility—Generic standards—Part 2: Immunity standard for industrial environments GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) GB/T 20138-2023 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) GB/T 21711.7-2018 Electromechanical elementary relays—Part 7:Test and measurement procedures GB/T 22707-2008 Artificial pollution tests on high-voltage insulators to be used on d.c.systems GB/T 24623-2009 Radio interference test on high-voltage insulators GB/T 26218.4-2019 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4:Insulators for d.c. systems GB/T 28534-2012 The health and environmental impact on release of sulphur hexafluoride(SF6)used in high-voltage switchgear and controlgear IEC 61850(所有部分) IEC TR 62271-306:2012+AMD1:2018

Adopt standards

IEC TS 62271-5:2024

Related Standards

Contact Us